New 6es7135-6GB00-0ba1 Simatic Et 200sp Electronic Analog Output Module PLC

• Task: Collect
• Structure: Closed-Loop
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Monitoring, Measurement
• Certification: RoHS, CE
• Model NO.: 6ES7135-6GB00-0BA1
• Condition: New
• Customized: Non-Customized
• Product Type Designation: Aq 2xi St
• Width: 15 mm
• Height: 73 mm
• Depth: 58 mm
• Transport Package: Carton
• Origin: German
• HS Code: 8538900000
• Production Capacity: 99999pieces/Year

Product Description

6ES7135-6GB00-0BA1 SIMATIC ET 200SP high quantity Analog output module PLC

Analog output modules

Overview

• 2 and 4-channel analog output (AQ) modules
• Apart from the standard type of delivery in an individual package, selected I/O modules and BaseUnits are also available in a pack of 10 units. The pack of 10 units enables the amount of waste to be reduced considerably, as well as saving the time and cost of unpacking individual modules.

For different requirements, the analog output modules offer:

• Function classes Standard, High Feature and High-Speed
• BaseUnits for single or multiple-conductor connection with automatic slot coding
• Potential distributor modules for system-integrated expansion with potential terminals
• Individual system-integrated potential group formation with self-assembling voltage busbars (a separate power module is no longer required for ET 200SP)
• Option for connecting current and voltage actuators
• Clear labeling on front of module
• LEDs for diagnostics, status, supply voltage and faults
• Electronically readable and non-volatile writable rating plate (I&M data 0 to 3)
• Extended functions and additional operating modes in some cases
  • Oversampling operating mode (n-fold equidistant output of an analog value within one PN cycle and thus the precisely timed output of an analog value or a sequence of analog values)
  • Isochronous mode (simultaneous equidistant output of analog values)
  • Output of substitute value in the event of interruptions to communication (shutdown, output adjustable substitute value, or keep last value)
  • Calibration during runtime
  • Re-parameterization during operation
  • Firmware update
  • Diagnostics of wire break, short-circuit, overflow, underflow
  • Value status (optional binary validity information of the analog value status in the process image)
  • Supports the PROFIenergy profile
• Optional accessories
  • Labeling strips (film or card)
  • Equipment labeling plate
  • Color-coded label with module-specific CC code
  • Shielding terminal

A quick and clear comparison of the functions of the AQ modules is offered by the TIA Selection Tool.

Application

The analog output modules enable analog actuators (proportional valves, drives, etc.) to be controlled.

 

Design

Usable BaseUnits (BU)

BaseUnits with an appropriate number of terminals are available for single or multi-conductor connection.

All variants that correspond to the BU type of the I/O module used can be used as BaseUnits (see Selection and ordering data). The BaseUnits that can be used for the respective module are noted on the front side of the module.

Potential distributor modules

With the new potential distributor modules for SIMATIC ET 200SP, additional potentials required within an ET 200SP station can be set up quickly and in a space-saving manner. Due to the free combinability of PotDis-BUs and PotDis-TBs, the potential distributor modules allow a large number of design variants and thus simple adaptation to individual needs. Within the station, existing potentials can be multiplied or even new potential groups can be formed. With 36 terminals per 15 mm width, the PotDis modules require very little space without compromising on the conductor cross-sections (maximum 2.5 mm²). They allow the connection of voltages up to 48 V DC with a maximum current carrying capacity of 10 A, and with the PotDis-TB-BR-W even up to 230 V AC/10 A as well as the possibility to connect a protective conductor.

Typical applications for the PotDis modules in connection with AQ modules are, for example, the supply of supply voltage for sensors.

Potential group formation

A light BU separates the self-assembling, internal voltage buses (P1, P2, AUX) and thus opens a new potential group. The supply voltage of a potential group must be fed in at the light BU of this potential group.

A dark BU forwards the supply voltage of the adjacent light BU on the left via the self-assembling voltage buses P1, P2 and AUX. A new infeed is therefore only required on the next light BU to the right. The setting of a further light BU is required whenever

• a new potential group is to be formed (for example, for isolating the supply voltage from module groups) or
• the maximum current simultaneously required by the potential group exceeds the permissible limit of 10 A.

Color identification of the terminals

The potentials at the terminals of the BaseUnit are defined by the inserted I/O module in each case. To prevent wiring faults, the potentials of the terminals can optionally be identified by means of module-specific color-coded labels. The color-coded label that matches the respective I/O module is defined by the color code CCxx of the I/O module. This color code is also printed on the front of the module.

In BaseUnits with the additional ten internally jumpered AUX terminals, these can also be identified with color-coded labels. For the ten AUX terminals, color-coded labels are available in red, blue, and yellow/green.

Labeling

Labeling strips

Labeling strips can be inserted on the front of the interface modules or I/O modules and individually labeled via STEP 7, macros, etc. No special additional holder is required. If required, they can be easily replaced with the component.

Equipment labeling plates

Equipment labeling plates enable the equipment to be easily identified (e.g. compliant with EN 81346). They are easily plugged onto the required component (interface modules, I/O modules and BaseUnits) and when required, they can be easily replaced with the component.

The following labeling components are available:

• Film labeling strips, light-gray, roll with 500 strips, perforated, for thermal transfer printers
• Film labeling strips, yellow, roll with 500 strips, perforated, for thermal transfer printers
• Card labeling strips (180 g/m²), light gray, ten DIN A4 sheets with 100 strips each, perforated, for laser printer
• Card labeling strips (180 g/m²), yellow, ten DIN A4 sheets with 100 strips each, perforated, for laser printer
• Equipment labeling plates, white, ten sheets each with 16 labels, for thermal transfer card printers or labels

Data sheet                                                                                                         6ES7135-6GB00-0BA1

SIMATIC ET 200SP, Analog output module, AQ 2xI Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit
General information
Product type designation	AQ 2xI ST From FS03 Yes BU type A0, A1 CC00
HW functional status
Firmware version FW update possible
usable BaseUnits
Color code for module-specific color identification plate
Product function
I&M data Isochronous mode Output range scalable	Yes; I&M0 to I&M3 No No
Engineering with
STEP 7 TIA Portal configurable/integrated from version STEP 7 configurable/integrated from version PROFIBUS from GSD version/GSD revision PROFINET from GSD version/GSD revision	V13 SP1 / - V5.5 SP3 / - GSD Revision 5 GSDML V2.3
Operating mode
Oversampling MSO	No No
CiR - Configuration in RUN
Reparameterization possible in RUN	Yes No
Calibration possible in RUN
Supply voltage
Rated value (DC)	24 V 19.2 V 28.8 V Yes
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Reverse polarity protection
Input current
Current consumption, max.	110 mA
Power loss
Power loss, typ.	1.5 W
Address area
Address space per module
Address space per module, max.	4 byte; + 1 byte for QI information
Hardware configuration
Automatic encoding Mechanical coding element Type of mechanical coding element	Yes Type A

 

	Analog outputs
	Number of analog outputs	2 1 ms No
	Cycle time (all channels), min.
	Analog output with oversampling
	Output ranges, current
	0 to 20 mA -20 mA to +20 mA 4 mA to 20 mA	Yes; 15 bit Yes; 16 bit incl. sign Yes; 14 bit
	Connection of actuators
	for current output two-wire connection	Yes
	Load impedance (in rated range of output)
	with current outputs, max. with current outputs, inductive load, max.	500 ohm 1 mH
	Destruction limits against externally applied voltages and currents
	Voltages at the outputs	30 V
	Cable length
	shielded, max.	1 000 m
	Analog value generation for the outputs
	Integration and conversion time/resolution per channel
	Resolution with overrange (bit including sign), max.	16 bit
	Settling time
	for resistive load for inductive load	0.1 ms; Typical value 0.5 ms
	Errors/accuracies
	Linearity error (relative to output range), (+/-)	0.03 % 0.005 %/K -50 dB 0.05 %
	Temperature error (relative to output range), (+/-)
	Crosstalk between the outputs, min.
	Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)
	Operational error limit in overall temperature range
	Voltage, relative to output range, (+/-) Current, relative to output range, (+/-)	0.5 % 0.5 %
	Basic error limit (operational limit at 25 °C)
	Voltage, relative to output range, (+/-) Current, relative to output range, (+/-)	0.3 % 0.3 %
	Interrupts/diagnostics/status information
	Diagnostics function	Yes Yes
	Substitute values connectable
	Alarms
	Diagnostic alarm	Yes
	Diagnoses
	Monitoring the supply voltage Wire-break Group error Overflow/underflow	Yes Yes Yes Yes
	Diagnostics indication LED
	Monitoring of the supply voltage (PWR-LED) Channel status display for channel diagnostics for module diagnostics	Yes; green PWR LED Yes; green LED No Yes; green/red DIAG LED
	Potential separation
	Potential separation channels
	between the channels between the channels and backplane bus between the channels and the power supply of the electronics	No Yes Yes
	Isolation
	Isolation tested with	707 V DC (type test)
	Ambient conditions
	Ambient temperature during operation

 

horizontal installation, min. horizontal installation, max. vertical installation, min. vertical installation, max.	-30 °C; < 0 °C as of FS03 60 °C -30 °C; < 0 °C as of FS03 50 °C
Altitude during operation relating to sea level
Installation altitude above sea level, max.	5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width	15 mm 73 mm 58 mm
Height
Depth
Weights
Weight, approx.	31 g

Shenzhen Aimiqu Technology Co., Ltd is a high-tech enterprise integrating industrial control product sales, automation engineering design, development and transformation. There are reliable teams with our company, for a variety of industries automation process control needs, to provide reliable, efficient services and automation overall solution.

established in March 2016, the business scope including general management project is automation equipment accessories, instruments and meters, valves, switches, electronic semiconductor, electronic products, digital products, electronic components, communications products, computer software and hardware, security equipment, energy conservation and environmental protection products, intelligent household products; Operating electronic commerce; Domestic trade, import and export of goods and technology. Electrical automation import and export trade for the main business.

 Since its establishment, Aimiqu has been providing industrial automation services, providing customers with high-quality products and automation solutions. In the long-term business process, Emicic has established good partnerships with well-known international manufacturers .


  At the same time, attaches great importance to product research and development, invested a lot of funds, independent production and development of electrical equipment such as power distribution cabinet and put into use. For customers in product performance testing, automated production lines, electronic equipment, wire and cable, and other aspects of energy saving equipment reform and development, design, transform the multitude of automation equipment and automation control system, and provide a reliable and professional support, and pre-sale, sale and after-sale services - dragon, by the customer the consistent high praise.

Welcome to !