| Customization: | Available |
|---|---|
| Task: | Collect |
| Structure: | Closed-Loop |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 4XI 2-/4-WIRE STANDARD, PACKING UNIT: 1 PIECE, FITS TO BU-TYPE A0, A1, COLOR CODE CC03, MODULE DIAGNOSIS, 16BIT, +/-0,3% | |
| General information | |
| Product type designation | AI 4xI 2-/4-wire ST From FS02 Yes BU type A0, A1 CC03 |
| HW functional status | |
Firmware version
|
|
| usable BaseUnits | |
| Color code for module-specific color identification plate | |
| Product function | |
|
Yes; I&M0 to I&M3 No No |
| Engineering with | |
|
V14 / - V5.6 and higher V8.1 SP1 One GSD file each, Revision 3 and 5 and higher GSDML V2.3 |
| Operating mode | |
|
No No |
| CiR - Configuration in RUN | |
| Reparameterization possible in RUN | Yes No |
| Calibration possible in RUN | |
| Supply voltage | |
| Rated value (DC) | 24 V 19.2 V 28.8 V Yes |
| permissible range, lower limit (DC) | |
| permissible range, upper limit (DC) | |
| Reverse polarity protection | |
| Input current | |
| Current consumption, max. | 37 mA; without sensor supply |
| Encoder supply | |
| 24 V encoder supply | |
|
Yes Yes 20 mA; max. 50 mA per channel for a duration < 10 s |
| Power loss | |
| Power loss, typ. | 0.85 W; Without encoder supply voltage |
| Address area | |
| Address space per module | |
|
8 byte; + 1 byte for QI information |
| Hardware configuration | |
Automatic encoding
|
Yes Yes Type A |
| Selection of BaseUnit for connection variants | |
|
BU type A0, A1 BU type A0, A1 |
| Analog inputs | |
| Number of analog inputs | 4; Differential inputs 50 mA Sum of the basic conversion times and additional processing times (depending on the parameterization of the active channels) |
| permissible input current for current input (destruction limit), max. | |
| Cycle time (all channels), min. | |
| Input ranges (rated values), currents | |
|
Yes; 16 bit incl. sign 100 ; + approx. 0.7 V diode forward voltage in 2-wire operation Yes 100 Yes; 15 bit 100 ; + approx. 0.7 V diode forward voltage in 2-wire operation |
| Cable length | |
|
1 000 m |
| Analog value generation for the inputs | |
| Measurement principle | integrating (Sigma-Delta) |
| Integration and conversion time/resolution per channel | |
|
16 bit Yes 16.6 / 50 / 60 Hz 180 / 60 / 50 ms |
| Smoothing of measured values | |
|
4; None; 4/8/16 times Yes |
| Encoder | |
| Connection of signal encoders | |
|
No Yes 650 Yes |
| Errors/accuracies | |
| Linearity error (relative to input range), (+/-) | 0.01 % 0.005 %/K 50 dB; Applies to up to ±5 V overvoltage in other channels 0.05 % |
| Temperature error (relative to input range), (+/-) | |
| Crosstalk between the inputs, min. | |
| Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | |
| Operational error limit in overall temperature range | |
|
0.5 % |
| Basic error limit (operational limit at 25 °C) | |
|
0.3 % |
| Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency | |
|
70 dB 10 V 90 dB |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Alarms | |
|
Yes |
|
No |
| Diagnoses | |
|
Yes Yes; at 4 to 20 mA Yes; 2-wire mode: Short-circuit of the encoder supply to ground or of an input to the encoder supply Yes Yes |
| Diagnostics indication LED | |
|
Yes; green LED Yes; green LED No Yes; green/red LED |
| Potential separation | |
| Potential separation channels | |
|
Yes; channel group-specific between 2-wire current input group and 4- wire voltage input group Yes Yes; only for 4-wire transducer |
| Permissible potential difference | |
| between the inputs (UCM) | 10 V DC |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Ambient conditions | |
| Ambient temperature during operation | |
|
-30 °C; < 0 °C as of FS02 60 °C -30 °C; < 0 °C as of FS02 50 °C |
| Altitude during operation relating to sea level | |
|
5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions | |
| Width | 15 mm 73 mm 58 mm |
| Height | |
| Depth | |
| Weights | |
| Weight, approx. | 31 g |
| Shenzhen Aimiqu Technology Co., Ltd. |
Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field. Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet. And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories . In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr... |
| 1.Who we are We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands 2.Our advantage We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. I will try my best to give you the best price,prove that we are sincere. 3.Our Service Purpose We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal 4.Lead-Time Depending on thr model and quantity you need.So please tell us what you need now 5.Can't find the model you need? We have only shown some models,If the model you need is not found here,please contact us |
){kind=link}