6es7131-6bf00-0ca0 Brand New Original High Quality Digital Input Module PLC Industrial Products

• Task: Following
• Structure: Combination
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Monitoring, Measurement
• Certification: CCC, CE, Ca
• Model NO.: ET200SP 6ES7131-6BF00-0CA0
• Condition: New
• Customized: Non-Customized
• Width: 15 mm
• Height: 73 mm
• Depth: 58 mm
• Transport Package: Carton
• Specification: Weight, approx. 28 g
• Origin: Germany
• HS Code: 9027900000
• Production Capacity: 99999pieces/Year

Product Description

6ES7131-6BF00-0CA0 SIMATIC ET 200SP New and original digital input module  PLC Highy Quality

Overview

• 4, 8 and 16-channel digital input (DI) modules
• Apart from the standard type of delivery in an individual package, selected I/O modules and BaseUnits are also available in a pack of 10 units. The pack of 10 units enables the amount of waste to be reduced considerably, as well as saving the time and cost of unpacking individual modules.

For different requirements, the digital input modules offer:

• Function classes Basic, Standard, High Feature and High Speed as well as fail-safe DI (see "Fail-safe I/O modules")
• BaseUnits for single or multiple-conductor connection with automatic slot coding
• Potential distributor modules for system-integrated expansion with additional potential terminals
• Individual system-integrated potential group formation with self-assembling voltage busbars (a separate power module is no longer required for ET 200SP)
• Option of connecting sensors compliant with IEC 61131 type 1, 2 or 3 (module-dependent) for rated voltages of up to 24 V DC or 230 V AC
• PNP (sinking input) and NPN (sourcing input) versions
• Clear labeling on front of module
• LEDs for diagnostics, status, supply voltage and faults (e.g. wire break/short-circuit)
• Electronically readable and non-volatile writable rating plate (I&M data 0 to 3)
• Extended functions and additional operating modes in some cases
  • MSI operating mode (simultaneous reading of input data from as many as three other PLCs)
  • Counting operating mode (multi-channel counter for pulse generators with 32-bit counting width and up to 10 kHz counting frequency)
  • Oversampling operating mode (n-fold equidistant acquisition of digital values within one PN cycle for increasing the time resolution for slow CPU cycles)
  • Parameterizable input delay time
  • Isochronous mode (simultaneous equidistant reading of all input channels)
  • Hardware interrupts
  • Pulse stretching
  • Re-parameterization during operation
  • Firmware update
  • Diagnosis of wire break and short-circuit (on channel or module basis)
  • Value status (optional binary validity information of the input signal in the process image)
  • Supports the PROFIenergy profile
• Optional accessories
  • Labeling strips (film or card)
  • Equipment labeling plate
  • Color-coded label with module-specific CC code
  • Shielding terminal

A quick and clear comparison of the functions of the different DI modules is offered by the TIA Selection Tool.

Overview of digital input modules

Digital input	PU	Article No.	CC code	BU type
DI 16 x 24 V DC ST	1	6ES7131-6BH01-0BA0	CC00	A0
DI 16 x 24 V DC ST	10	6ES7131-6BH01-2BA0	CC00	A0
DI 8 x 24 V DC BA	1	6ES7131-6BF01-0AA0	CC01	A0
DI 8 x 24 V DC BA	10	6ES7131-6BF01-2AA0	CC01	A0
DI 8 x 24 V DC SRC BA	1	6ES7131-6BF61-0AA0	CC02	A0
DI 8 x 24 V DC ST	1	6ES7131-6BF01-0BA0	CC01	A0
DI 8 x 24 V DC ST	10	6ES7131-6BF01-2BA0	CC01	A0
DI 8 x 24 V DC HF	1	6ES7131-6BF00-0CA0	CC01	A0
DI 8 x 24 V DC HF	10	6ES7131-6BF00-2CA0	CC01	A0
DI 8 x NAMUR HF	1	6ES7131-6TF00-0CA0	CC01	A0
DI 8 x 24 V DC HS With three operating modes: High-speed isochronous DI 4 pulse counters, 32-bit, 10 kHz Oversampling	1	6ES7131-6BF00-0DA0	CC01	A0
DI 4 x 120 ... 230 V AC ST	1	6ES7131-6FD01-0BB1	CC41	B1
DI 8 x 24 V AC ... 48 V UC	1	6ES7131-6CF00-0AU0	CC20	U0

Application

The signals from digital sensors (switches, inductive and optical sensors etc.) can be recorded and transferred to the higher-level controller via the digital input modules.

 

 

Design

Usable BaseUnits (BU)

BaseUnits with an appropriate number of terminals are available for single or multi-conductor connection.

All variants that correspond to the BU type of the I/O module used can be used as BaseUnits (see Selection and ordering data). The BaseUnits that can be used for the respective module are noted on the front side of the module.

Potential distributor modules

With the new potential distributor modules for SIMATIC ET 200SP, additional potentials required within an ET 200SP station can be set up quickly and in a space-saving manner. Due to the free combinability of PotDis-BUs and PotDis-TBs, the potential distributor modules allow a large number of design variants and thus simple adaptation to individual needs. Within the station, existing potentials can be multiplied or even new potential groups can be formed. With 36 terminals per 15 mm width, the PotDis modules require very little space without compromising on the conductor cross-sections (maximum 2.5 mm²). They allow the connection of voltages up to 48 V DC with a maximum current carrying capacity of 10 A, and with the PotDis-TB-BR-W even up to 230 V AC/10 A as well as the possibility to connect a protective conductor.

Typical applications for the PotDis modules in connection with DI modules are:

• 3-wire connection (signal, 24 V DC, mass) for 16-channel digital input modules with reduced installation height (117 mm instead of 141 mm)
• Connection of non-required switching outputs for antivalent sensors (4-wire connection)
• Supply of supply voltage for sensors

Potential group formation

A light BU separates the self-assembling, internal voltage buses (P1, P2, AUX) and thus opens a new potential group. The supply voltage of a potential group must be fed in at the light BU of this potential group.

A dark BU forwards the supply voltage of the adjacent light BU on the left via the self-assembling voltage buses P1, P2 and AUX. A new infeed is therefore only required on the next light BU to the right. The setting of a further light BU is required whenever

• a new potential group is to be formed (for example, for isolating the supply voltage from module groups) or
• the maximum current simultaneously required by the potential group exceeds the permissible limit of 10 A.

Color identification of the terminals

The potentials at the terminals of the BaseUnit are defined by the inserted I/O module in each case. To prevent wiring faults, the potentials of the terminals can optionally be identified by means of module-specific color-coded labels. The color-coded label that matches the respective I/O module is defined by the color code CCxx of the I/O module. This color code is also printed on the front of the module.

In BaseUnits with the additional ten internally jumpered AUX terminals, these can also be identified with color-coded labels. For the ten AUX terminals, color-coded labels are available in red, blue, and yellow/green.

Labeling

Labeling strips

Labeling strips can be inserted on the front of the interface modules or I/O modules and individually labeled via STEP 7, macros, etc. No special additional holder is required. If required, they can be easily replaced with the component.

Equipment labeling plates

Equipment labeling plates enable the equipment to be easily identified (e.g. compliant with EN 81346). They are easily plugged onto the required component (interface modules, I/O modules and BaseUnits) and when required, they can be easily replaced with the component.

The following labeling components are available:

• Film labeling strips, light-gray, roll with 500 strips, perforated, for thermal transfer printers
• Film labeling strips, yellow, roll with 500 strips, perforated, for thermal transfer printers
• Card labeling strips (180 g/m²), light gray, ten DIN A4 sheets with 100 strips each, perforated, for laser printer
• Card labeling strips (180 g/m²), yellow, ten DIN A4 sheets with 100 strips each, perforated, for laser printer
• Equipment labeling plates, white, ten sheets each with 16 labels, for thermal transfer card printers or labels

System-integrated shield connection

For the space-saving and EMC-optimized connection of cable shields, a shield connection is available that is quick and easy to mount. This consists of one shield connection element that can be plugged onto the BaseUnit and one shield terminal for each module. The low-impedance connection to the functional ground (DIN rail) is achieved without any additional wiring by the user.

Data sheet                                                                                                          6ES7131-6BF00-0CA0

 

SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Feature, input type 3 (IEC 61131), sink input, (PNP, sink input) Packing unit: 1 unit, suitable for BU type A0, color code CC01, input delay 0.05..20 ms; Channel diagnostics for: Encoder power supply short circuit, wire break, supply voltage, channel fault LED
General information
Product type designation	DI 8x24 V DC HF From FS07 Yes BU type A0 CC01
HW functional status
Firmware version FW update possible
usable BaseUnits
Color code for module-specific color identification plate
Product function
I&M data Isochronous mode	Yes; I&M0 to I&M3 Yes
Engineering with
STEP 7 TIA Portal configurable/integrated from version	V13 SP1 / -
STEP 7 configurable/integrated from version	V5.5 / -
PCS 7 configurable/integrated from version	V8.1 SP1
PROFIBUS from GSD version/GSD revision	One GSD file each, Revision 3 and 5 and higher
PROFINET from GSD version/GSD revision	GSDML V2.3
Operating mode
DI	Yes
Counter	No
Oversampling	No
MSI	Yes
Supply voltage
Rated value (DC)	24 V 19.2 V 28.8 V Yes
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Reverse polarity protection
Encoder supply
Number of outputs	8 19.2 V Yes
Output voltage, min.
Short-circuit protection
24 V encoder supply
24 V	Yes
Short-circuit protection	Yes; per channel, electronic
Output current per channel, max.	700 mA
Output current per module, max.	700 mA
Power loss
Power loss, typ.	1.5 W; 24 V, 8 inputs supplied via encoder supply
Address area

 

	Address space per module
	Inputs	1 byte; + 1 byte for QI information
	Hardware configuration
	Automatic encoding Mechanical coding element Type of mechanical coding element	Yes
		Yes
		Type A
	Submodules
	Number of configurable submodules, max.	4
	Selection of BaseUnit for connection variants
	1-wire connection	BU type A0 BU type A0 BU type A0 with AUX terminals or potential distributor module BU type A0 + Potential distributor module
	2-wire connection
	3-wire connection
	4-wire connection
	Digital inputs
	Number of digital inputs	8
	Digital inputs, parameterizable	Yes
	Source/sink input	P-reading
	Input characteristic curve in accordance with IEC 61131, type 3	Yes
	Pulse extension Length	Yes; Pulse duration from 4 µs
		2 s; 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s
	Edge evaluation	Yes; rising edge, falling edge, edge change
	Input voltage
	Rated value (DC)	24 V
	for signal "0"	-30 to +5 V
	for signal "1"	+11 to +30V
	Input current
	for signal "1", typ.	2.5 mA
	Input delay (for rated value of input voltage)
	for standard inputs
	- parameterizable	Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)
	- at "0" to "1", min.	0.05 ms
	- at "0" to "1", max.	20 ms
	- at "1" to "0", min.	0.05 ms
	- at "1" to "0", max.	20 ms
	Cable length
	shielded, max.	1 000 m
	unshielded, max.	600 m
	Encoder
	Connectable encoders
	2-wire sensor - permissible quiescent current (2-wire sensor), max.	Yes
		1.5 mA
	Isochronous mode
	Filtering and processing time (TCI), min.	420 µs
	Bus cycle time (TDP), min.	500 µs
	Jitter, max.	8 µs
	Interrupts/diagnostics/status information
	Diagnostics function	Yes
	Alarms
	Diagnostic alarm	Yes; channel by channel
	Hardware interrupt	Yes; Parameterizable, channels 0 to 7
	Diagnoses
	Diagnostic information readable Monitoring the supply voltage - parameterizable Monitoring of encoder power supply Wire-break	Yes
		Yes
		Yes
		Yes; channel by channel
		Yes; Channel by channel, optional protective circuit for preventing wire- break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm

 

Short-circuit	Yes; channel by channel
Diagnostics indication LED
Monitoring of the supply voltage (PWR-LED) Channel status display for channel diagnostics for module diagnostics	Yes; green PWR LED Yes; green LED Yes; red LED Yes; green/red DIAG LED
Potential separation
Potential separation channels
between the channels between the channels and backplane bus between the channels and the power supply of the electronics	No Yes No
Isolation
Isolation tested with	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions	No
Ambient conditions
Ambient temperature during operation
horizontal installation, min. horizontal installation, max. vertical installation, min. vertical installation, max.	-30 °C; < 0 °C as of FS07 60 °C -30 °C; < 0 °C as of FS07 50 °C
Altitude during operation relating to sea level
Installation altitude above sea level, max.	5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width	15 mm 73 mm 58 mm
Height
Depth
Weights
Weight, approx.	28 g

Shenzhen Aimiqu Technology Co., Ltd is a high-tech enterprise integrating industrial control product sales, automation engineering design, development and transformation. There are reliable teams with our company, for a variety of industries automation process control needs, to provide reliable, efficient services and automation overall solution.

established in March 2016, the business scope including general management project is automation equipment accessories, instruments and meters, valves, switches, electronic semiconductor, electronic products, digital products, electronic components, communications products, computer software and hardware, security equipment, energy conservation and environmental protection products, intelligent household products; Operating electronic commerce; Domestic trade, import and export of goods and technology. Electrical automation import and export trade for the main business.

 Since its establishment, Aimiqu has been providing industrial automation services, providing customers with high-quality products and automation solutions. In the long-term business process, Emicic has established good partnerships with well-known international manufacturers .


  At the same time, attaches great importance to product research and development, invested a lot of funds, independent production and development of electrical equipment such as power distribution cabinet and put into use. For customers in product performance testing, automated production lines, electronic equipment, wire and cable, and other aspects of energy saving equipment reform and development, design, transform the multitude of automation equipment and automation control system, and provide a reliable and professional support, and pre-sale, sale and after-sale services - dragon, by the customer the consistent high praise.

Welcome to !