| Task: | Program |
|---|---|
| Structure: | Combination |
| Mathematical Model: | Linear |
| Signal: | Continuous |
| Function: | Automatic Control, Protection, Monitoring, Measurement |
| Certification: | CE |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Manufacturer | Rockwell Automation |
| Brand | AB |
| Part Number/Catalog No. | 1734-AENTR |
| Series | POINT I/O |
| Module Type | Ethernet/IP Adapter Module |
| Input Voltage Rating | 24 Volts DC |
| Enclosure Rating | Open |
| Operating Temperature | -20 to 60 degrees Celsius |
| Ethernet Communication Rate | 10/100 Mbits/s, Half or Full-Duples |
| Maximum Power Consumption | 10.4 Watts at 28.8 Volts DC |
| Weight | 0.62 pounds |
| Input Overvoltage Protection | Reverse Polarity Protected |
| Isolation Voltage | 50 Volts (Continuous) |
| Maximum Expansion I/O Capacity | 63 Modules, 31 Direct Connections |
The AB 1734-AENTR is a dual Ethernet POINT I/O communication module that is used to interface a POINT I/O rack to the central controller in the Ethernet I/P network. This adapter is capable of being implemented in Ring, Star and Tree Topology and is powered by an External 24VDC supply.
The 1734-AENTR supports TCP/UDP/IP protocol with physical connection established using Category 5 or Category 6 cable. This adapter supports 10/100 Mbit transmission speed with auto-negotiation function. This module is configured using RSLogix5000 or Studio5000 Logix designer software. Selection of software mainly depends on the firmware of existing modules and the required feature needed to enable such as security and bug fixes. Additionally, RSLinx software may also be used to detect and configure this module.
IP address may be assigned through the thumbwheel switches or with the use of BOOT-P DHCP utility. In most applications, this module is configured with a static IP address. With static IP address, the IP address do not change even if the device is powered off. Alternatively, the module may be configured with dynamic IP address. With dynamic type of address, the IP address changes every time the module is power cycled. This mode is applied in applications with a very specific requirement as it may result in communication errors due to sudden change in the IP address.
This module ins installed on the leftmost part of a POINT I/O system and the only module that establishes connection to the network and to the main controller. It transfers I/O data from its local I/O backplane to the controller over the network. Additionally, this POINT I/O adapter supports simultaneous communication with different scanner modules.
The AB 1734-AENTR I/O is a 2 port Ethernet adapter provides Ethernet/IP network connectivity at a rate of 10 to 100 Mbits/s, half or full-duplex. It comes with 2 ports for pass-through, Category 5 RJ-45 connectors that are used to support ring or daisy chain/linear networks, and the existing tree and star network topologies. These Ethernet ports are configured as embedded Switches. The adapter is part of the 1734 series of 2-port communications adapters for POINT I/O modules. It uses messages encapsulated within the standard TCP/UDP/IP protocol. Category 5-rated twisted pair cable is used for interfacing. I/O configuration is done via the RSLogix 5000 software. No network scheduling and routing tables are required. Plus, the 1734-AENTR is capable of simultaneously supporting connections from multiple controllers. The 1734-AENTR adapter is mounted and positioned vertically on a DIN rail. It ships with the pen push thumbwheel switches used for setting the network address. Other ways to set the network Internet Protocol address includes retrieving the IP address from a nonvolatile memory and using a DHCP server (set the module to DHCP enabled). To avoid unauthorized control or loss of control, assign a fixed IP address to the I/O adapter. If the DHCP utility is used, make sure that it is configured with the same IP address as the adapter.
What is the necessary power supply for 1734-AENTR 2 Ethernet Adapter Module?
The POINT I/O 2 Ethernet Adapter 1734-AENTR requires a 12 to 24 Volt DC power supply. Do not use an AC power source to this supply, it can only take DC power.
What is the enclosure rating for 1734-AENTR Ethernet Adapter Module?
The POINT I/O 2 Ethernet Adapter Module 1734-AENTR has an open-style enclosure.
What is the price of a 1734-AENTR POINT I/O 2 Ethernet Adapter?
Submit quote request, send us an email.
| Shenzhen Aimiqu Technology Co., Ltd. |
Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field. Provide products, solutions and services for the majority of industrial enterprises and governments with automation systems, digital factories, industrial Internet and industrial big data intelligent integration, and strive to become a domestic intelligent manufacturing overall solution provider. Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet. And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories . In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr... |
| 1.Who we are We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands 2.Our advantage We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. I will try my best to give you the best price,prove that we are sincere. 3.Our Service Purpose We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal 4.Lead-Time Depending on thr model and quantity you need.So please tell us what you need now 5.Can't find the model you need? We have only shown some models,If the model you need is not found here,please contact us |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}