New 6es7155-6au01-0bn0 Electrical Im 155-6 Pn St Interface Module PLC

• Customization: Available
• Task: Connect
• Mathematical Model: Linear
• Model NO.: 6ES7155-6AU01-0BN0
• Signal: Continuous
• Function: Connect
• Certification: CE
• Condition: New
• Customized: Non-Customized
• Width: 50 mm
• Height: 117 mm
• Depth: 74 mm
• Transport Package: Carton
• Specification: Weight, approx. 147 g
• Origin: Germany
• HS Code: 8471504090
• Production Capacity: 99999pieces/Year

Product Description

6ES7155-6AU01-0BN0  high quantity IM 155-6 PN ST Interface module PLC

SIMATIC ET 200SP, PROFINET interface module IM 155-6PN Standard, max. 32 I/O modules, and 16 ET 200AL modules, single hot swap, incl. server module (6ES7193-6PA00-0AA0)

• Short data update times of typically 1 ms
• Single Hot Swap (withdrawing and insertion of an I/O module during operation without impairing the communication with the remaining modules)
• Operation with gaps (empty BaseUnits)
• Complete diagnostic support, extending to channel-by-channel diagnostics
• Configuration control / option handling (adaptation of the actual configuration via user program)
• Device replacement without programming device, with automatic re-initialization, with and without topological configuring
• I&M data 0 to 3 (electronic rating plate with non-volatile storage of plant data)
• Firmware update
• Pluggable 24 V DC supply connection
• Mains/voltage failure buffering time of at least 5 ms or 10 ms
• Labeling option via optional labeling strips and equipment labeling plates

When using PROFINET interface modules, the following basic functions are also included:

• Media redundancy (MRP)
• Integrated 2-port switch
• Freely selectable connection system (Standard function class and above) and physical connection (High Feature function class and above) by means of SIMATIC BusAdapters, also as system-integrated media converter from fiber-optic to copper cable. Can also be used for interface modules with MultiFieldbus interface.
• Reset button for simple return to factory settings without the need for programming device
• Automatic synchronization of the backplane bus to the PROFINET cycle to minimize the response time fluctuations (jitter)

Data sheet                                                                                                         6ES7155-6AU01-0BN0

	SIMATIC ET 200SP, PROFINET interface module IM 155-6PN Standard, max. 32 I/O modules, and 16 ET 200AL modules, single hot swap, incl. server module (6ES7193-6PA00-0AA0)
	General information
	Product type designation	IM 155-6 PN ST
	HW functional status	From FS03
	Firmware version FW update possible	Yes
	Product function
	I&M data	Yes; I&M0 to I&M3
	Module swapping during operation (hot swapping)	Yes; Single hot swapping
	Isochronous mode	No
	Engineering with
	STEP 7 TIA Portal configurable/integrated from version	V14
	STEP 7 configurable/integrated from version	V5.5 SP4 and higher
	PROFINET from GSD version/GSD revision	V2.3 / -
	Configuration control
	via dataset	Yes
	Supply voltage
	Rated value (DC)	24 V
	permissible range, lower limit (DC)	19.2 V
	permissible range, upper limit (DC)	28.8 V
	Reverse polarity protection	Yes
	Short-circuit protection	Yes
	Mains buffering
	Mains/voltage failure stored energy time	10 ms
	Input current
	Current consumption (rated value)	450 mA
	Current consumption, max.	550 mA
	Inrush current, max.	3.7 A
	I²t	0.09 A²·s
	Power
	Infeed power to the backplane bus	4.5 W
	Power loss
	Power loss, typ.	1.9 W
	Address area
	Address space per module
	Address space per module, max.	256 byte; per input / output
	Address space per station
	Address space per station, max.	512 byte; Dependent on configuration
	Hardware configuration

 

Rack
Quantity of operable ET 200SP modules, max.	32
Quantity of operable ET 200AL modules, max.	16
Submodules
Number of submodules per station, max.	256
Interfaces
Number of PROFINET interfaces	1; 2 ports (switch)
1. Interface
Interface types
Number of ports integrated switch BusAdapter (PROFINET)	2 Yes Yes; compatible BusAdapters: BA 2x RJ45, BA 2x FC, BA 2x M12
Protocols
PROFINET IO Device Open IE communication Media redundancy	Yes Yes Yes; PROFINET MRP
Interface types
RJ 45 (Ethernet)
Transmission procedure	PROFINET with 100 Mbit/s full duplex (100BASE-TX)
100 Mbps	Yes; PROFINET with 100 Mbit/s full duplex (100BASE-TX)
Autonegotiation	Yes
Autocrossing	Yes
Protocols
PROFINET IO Device
Services
- IRT	Yes; with send cycles of between 250 µs and 4 ms in increments of 125 µs
- PROFIenergy	Yes
- Prioritized startup	Yes
- Shared device	Yes
- Number of IO Controllers with shared device, max.	2
Redundancy mode
PROFINET system redundancy (S2)	No
Media redundancy
MRP MRPD	Yes No
Open IE communication
TCP/IP SNMP LLDP	Yes Yes Yes
Interrupts/diagnostics/status information
Status indicator	Yes Yes Yes
Alarms
Diagnostics function
Diagnostics indication LED
RUN LED	Yes; green LED
ERROR LED	Yes; red LED
MAINT LED	Yes; Yellow LED
Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
Connection display LINK TX/RX	Yes; 2x green link LEDs on BusAdapter
Potential separation
between backplane bus and electronics	No Yes; 1500 V AC (type test) No
between PROFINET and all other circuits
between supply and all other circuits
Permissible potential difference
between different circuits	Safety extra low voltage SELV
Isolation
Isolation tested with	707 V DC (type test)

 

Standards, approvals, certificates
Network loading class	2 According to Security Level 1 Test Cases V1.1.1
Security level
Ambient conditions
Ambient temperature during operation
horizontal installation, min. horizontal installation, max. vertical installation, min. vertical installation, max.	0 °C 60 °C 0 °C 50 °C
Altitude during operation relating to sea level
Installation altitude above sea level, max.	5 000 m
connection method / header
ET-Connection
via BU/BA Send	Yes; + 16 ET 200AL modules
Dimensions
Width	50 mm 117 mm 74 mm
Height
Depth
Weights
Weight, approx.	147 g; without BusAdapter

 

 

 

Shenzhen Aimiqu Technology Co., Ltd.

Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field.

 

Provide products, solutions and services for the majority of industrial enterprises and governments with automation systems, digital factories, industrial Internet and industrial big data intelligent integration, and strive to become a domestic intelligent manufacturing overall solution provider.


Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet.

And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories .

In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr...

 

Hot selling brand

Packing and shipping

                                                                                                                                                                                                              

FAQ
                                                                                                                                                                                                              

1.Who we are
  We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands

2.Our advantage
  We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. 
  I will try my best to give you the best price,prove that we are sincere. 

3.Our Service Purpose
   We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal

4.Lead-Time
   Depending on thr model and quantity you need.So please tell us what you need now 

5.Can't find the model you need?
   We have only shown some models,If the model you need is not found here,please contact us