New 6es7136-6ra00-0bf0 Siemen-S Et200sp Digital Relay Output Original Module PLC

• Customization: Available
• Task: Digital Output
• Structure: Closed-Loop
• Model NO.: 6ES7136-6RA00-0BF0
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Digital Output
• Certification: RoHS, CCC, CE
• Condition: New
• Customized: Non-Customized
• Material: Aluminum Alloy
• Product Type Designation: F-Rq 24 ... 48VDC/24 ... 230VAC/5A St
• Width: 20 mm
• Height: 73 mm
• Depth: 58 mm
• Transport Package: Carton
• Specification: Weight, approx: 56g
• Origin: Germany
• HS Code: 8538900000
• Production Capacity: 99999pieces/Year

Product Description

6ES7136-6RA00-0BF0 ET200SP Digital F-output module relay PLC

Digital F-output module relay
Overview

The digital F electronic module relay 1 F-RQ DC 24VDC/24.230VAC/5 A has the following characteristics:

• 1 relay output (2 NO contacts)
• Total output current 5 A
• Rated load voltage 24 V DC and 24 ... 230 V AC
• The control circuit of the two safety relays must be routed from the outside to the respective terminals

The attainable safety integrity level is SIL 3 (IEC 61508) when the control of the F-RQ module is implemented via a fail-safe output (e.g. ET 200SP 4F-DQ 24 V DC/2 A PROFIsafe).

 

 

Application

The 1 F-RQ module is very versatile and can be used in multiple ways, e.g.

• for switching of external voltages,
• when floating signals are needed,
• for controller releases,
• when higher switching capacities (> 2 A) or other voltage levels are needed.

 

Design

Control must be carried out from the outside via a fail-safe electronic module to the respective IN P and IN M terminals. The ET 200SP 4 F-DQ (6ES7136-6DB00-0CA0) can be used for this, for example.

One channel of the 4 F-DQ module can be used to control a further 1 F-RQ module. The output signal can be looped through for this purpose: OUT P and OUT M of the first 1F-RQ module are wired to IN P and IN M of the second 1F-RQ module.

Data sheet                                                                                                          6ES7136-6RA00-0BF0

SIMATIC DP, Electronics module f. ET200SP, F-RQ 1x 24 V DC/24..230VAC/5A ST, 20 mm overall width, 1 relay output (2 NO) Summation output current 5 A, load voltage 24 V DC and 24.. 230 V AC, Can be used up to PL E (ISO 13849-1: 2008)/ SIL 3 (IEC 61508: 2010) if control takes place by (e.g. 6ES7136-6DB00-0CA0) F-DQ
General information
Product type designation	F-RQ 24 ... 48VDC/24 ... 230VAC/5A ST BU type F0 CC42
usable BaseUnits
Color code for module-specific color identification plate
Product function
I&M data	Yes; I&M0 to I&M3
Engineering with
STEP 7 TIA Portal configurable/integrated from version STEP 7 configurable/integrated from version PROFINET from GSD version/GSD revision	V13 V5.5 SP4 and higher V2.31
Supply voltage
Rated value (DC)	24 V; Coil voltage 20.4 V 28.8 V No
permissible range, lower limit (DC)
permissible range, upper limit (DC)
power supply according to NEC Class 2 required
Power
Power available from the backplane bus	100 mW
Power loss
Power loss, typ.	1 W
Address area
Address space per module
Inputs	1 byte
Hardware configuration
Automatic encoding Mechanical coding element Type of mechanical coding element	Yes Yes type C
Digital outputs
Type of digital output	Relays 1 No Yes
Number of digital outputs
Limitation of inductive shutdown voltage to
Controlling a digital input
Switching capacity of the outputs
with resistive load, max. on lamp load, max.	5 A 25 W
Switching frequency
with resistive load, max. with inductive load, max. with inductive load (acc. to IEC 60947-5-1, DC13),	2 Hz 0.1 Hz; See data in manual 0.1 Hz

 

max. with inductive load (acc. to IEC 60947-5-1, AC15), max.	2 Hz
Total current of the outputs (per module)
horizontal installation
up to 40 °C, max. up to 50 °C, max. up to 60 °C, max.	5 A; note derating data in the manual 4 A; note derating data in the manual 3 A; note derating data in the manual
vertical installation
- up to 50 °C, max.	3 A; note derating data in the manual
Relay outputs
Number of relay outputs Rated supply voltage of relay coil L+ (DC) Current consumption of relays (coil current of all relays), max. external protection for relay outputs Relay approved acc. to UL 508	1; 2 NO contacts 24 V 70 mA yes; 6 A, see data in manual Yes; Pilot Duty B300, R300
Switching capacity of contacts
with inductive load, max. with resistive load, max. Thermal continuous current, max. Switching current, min. Switching current after exceeding 300 mA, min. Switching current after exceeding 300 mA, max. Rated switching voltage (DC) Rated switching voltage (AC)	see additional description in the manual see additional description in the manual 5 A 1 mA 10 mA 5 A 24 V 230 V
Cable length
shielded, max. unshielded, max. Control cable (input), max.	500 m; for load contacts 300 m; for load contacts 10 m
Interrupts/diagnostics/status information
Diagnostics function	Yes
Diagnostics indication LED
RUN LED Channel status display	Yes; green/red DIAG LED Yes; green LED
Potential separation
Potential separation channels
between the channels between the channels and backplane bus between the channels and the power supply of the electronics	Yes; for SELV / PELV only Yes Yes
Permissible potential difference
between channels and backplane bus/supply voltage	250 V AC (reinforced insulation)
Isolation
Isolation tested with	2 545 V DC/2 s (routine test) III
Overvoltage category
tested with
between channels and backplane bus/supply voltage between backplane bus and supply voltage	DC 2 545 V 2 s (routine test), impulse voltage test DC 7 200 V / 5 positive and 5 negative pulses (type test) 707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions	Yes
Highest safety class achievable in safety mode
Performance level according to ISO 13849-1 Category according to ISO 13849-1 SIL acc. to IEC 61508	PLe 4 SIL 3
Probability of failure (for service life of 20 years and repair time of 100 hours)
Low demand mode: PFDavg in accordance with SIL2 Low demand mode: PFDavg in accordance	< 1.00E-04, function test 1x per year < 1.00E-05, function test 1x per month

 

with SIL3 High demand/continuous mode: PFH in accordance with SIL2 High demand/continuous mode: PFH in accordance with SIL3	< 1.00E-08 1/h, function test 1x per year < 6.00E-09 1/h, function test 1x per month
Ambient conditions
Ambient temperature during operation
horizontal installation, min. horizontal installation, max. vertical installation, min. vertical installation, max.	0 °C 60 °C 0 °C 50 °C
Dimensions
Width	20 mm 73 mm 58 mm
Height
Depth
Weights
Weight, approx.	56 g

 is a high-tech enterprise integrating industrial control product sales, automation engineering design, development and transformation. There are reliable teams with our company, for a variety of industries automation process control needs, to provide reliable, efficient services and automation overall solution.

 established in March 2016, the business scope including general management project is automation equipment accessories, instruments and meters, valves, switches, electronic semiconductor, electronic products, digital products, electronic components, communications products, computer software and hardware, security equipment, energy conservation and environmental protection products, intelligent household products; Operating electronic commerce; Domestic trade, import and export of goods and technology. Electrical automation import and export trade for the main business.

Since its establishment, Aimiqu has been providing industrial automation services, providing customers with high-quality products and automation solutions. In the long-term business process, Emicic has established good partnerships with well-known international manufacturers.
At the same time, attaches great importance to product research and development, invested a lot of funds, independent production and development of electrical equipment such as power distribution cabinet and put into use. For customers in product performance testing, automated production lines, electronic equipment, wire and cable, and other aspects of energy saving equipment reform and development, design, transform the multitude of automation equipment and automation control system, and provide a reliable and professional support, and pre-sale, sale and after-sale services - dragon, by the customer the consistent high praise.

Welcome to