| Customization: | Available |
|---|---|
| Type: | Liquid Level Sensor |
| Output Signal Type: | Digital Type |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Number of inputs and outputs | Number of digital outputs: 1; Number of analog outputs: 1 |
| Probe length L[mm] | 100...1600 |
| Process connection | threaded connection G 3/4 external thread |
| System | gold-plated contacts |
| Application | for industrial applications |
| Media | Liquids |
| Dielectric constant of the medium | ≥ 1,8; (for media with a dielectric constant of 1.8...5 (e.g. oils), a coaxial pipe is needed for operation) |
| Recommended media | water; water-based media; oils; oil-based media |
| Cannot be used for | See the operating instructions, chapter "Function and features". |
| Process temperature[°C] | -25...80; (90 < 1 h ; see note under remarks) |
| Pressure rating[bar] | 16 |
| Vacuum resistance[mbar] | -1000 |
| MAWP (for applications according to CRN)[bar] | 16 |
| Operating voltage[V] | 18...30 DC |
| Current consumption[mA] | < 30 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] | < 3 |
| Measuring principle | guided wave radar |
| Number of inputs and outputs | Number of digital outputs: 1; Number of analog outputs: 1 |
| Total number of outputs | 2 |
| Output signal | switching signal; analog signal; IO-Link |
| Electrical design | PNP |
| Number of digital outputs | 1 |
| Output function | normally open / closed; (configurable) |
| Max. voltage drop switching output DC[V] | 2.5 |
| Permanent current rating of switching output DC[mA] | 200 |
| Number of analog outputs | 1 |
| Analog current output[mA] | 4...20, invertible; (scalable) |
| Max. load[Ω] | 500 |
| Analog voltage output[V] | 0...10, invertible; (scalable) |
| Min. load resistance[Ω] | 2000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | thermal, pulsed |
| Overload protection | yes |
| Probe length L[mm] | 100...1600 |
| Active range A[mm] | L-40; (when set to oil and oil based media: L-60) |
| Inactive range I1 / I2[mm] | 30 / 10; (when set to oil and oil based media: 30 / 30) |
| Sampling rate[Hz] | 4 |
| Setting range | ||
|---|---|---|
| Set point SP[mm] | 15...L-30 | |
| Note on setpoint SP |
|
|
| Reset point rP[mm] | 10... L-35 | |
| Note on reset point rP |
|
|
| In steps of[mm] | 5 | |
| Hysteresis[mm] | > 5 |
| Repeatability[mm] | ± 5 |
| Measuring error[mm] | ± 7 |
| Offset error[mm] | 5 |
| Resolution[mm] | 1 |
| Zero signal (voltage)[V] | 0 |
| Zero signal (current)[mA] | 4.0 |
| Full signal (voltage)[V] | 10 |
| Full signal (current)[mA] | 20 |
| Temperature drift per 10 K | ± 0.2 |
| Communication interface | IO-Link | ||||
| Transmission type | COM2 (38,4 kBaud) | ||||
| IO-Link revision | 1.1 | ||||
| SDCI standard | IEC 61131-9 CDV | ||||
| SIO mode | yes | ||||
| Required master port class | A | ||||
| Process data analog | 1 | ||||
| Process data binary | 1 | ||||
| Min. process cycle time[ms] | 2.3 | ||||
| Supported DeviceIDs |
|
| Ambient temperature[°C] | -25...60 |
| Storage temperature[°C] | -40...80 |
| Protection | IP 67 |
| EMC |
|
||||||
| Shock resistance |
|
||||||
| Vibration resistance |
|
||||||
| MTTF[years] | 196 | ||||||
| UL approval |
|
| Weight[g] | 378.4 |
| Dimensions[mm] | Ø 50 / L = 99 |
| Material | stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; PBT; PC; PEI; TPE-V |
| Materials (wetted parts) | stainless steel (1.4305 / 303); probe connection: stainless steel (1.4435 / 316L); PTFE; FKM; sealing: NBR fiber-reinforced |
| Process connection | threaded connection G 3/4 external thread |
| Display |
|
| Notes | Please see the technical note under "Downloads"; For high process temperatures: The temperature at the process connection is decisive. The actual medium temperature may be higher. |
| Pack quantity | 1 pcs. |
| Connection | Connector: 1 x M12; coding: A; Contacts: gold-pla |
| Shenzhen Aimiqu Technology Co., Ltd. |
Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field. Provide products, solutions and services for the majority of industrial enterprises and governments with automation systems, digital factories, industrial Internet and industrial big data intelligent integration, and strive to become a domestic intelligent manufacturing overall solution provider. Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet. And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories . In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr... |
| 1.Who we are We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands 2.Our advantage We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. I will try my best to give you the best price,prove that we are sincere. 3.Our Service Purpose We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal 4.Lead-Time Depending on thr model and quantity you need.So please tell us what you need now 5.Can't find the model you need? We have only shown some models,If the model you need is not found here,please contact us |
){kind=link}