| Customization: | Available |
|---|---|
| Material: | Stainless Steel |
| Usage: | Print, Semiconductor, Automation and Control, Robot |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Feature | Value |
| Stroke | 1 mm ... 2800 mm |
| Piston diameter | 100 mm |
| Piston rod thread | M20x1.5 M12 |
| Max. angle of rotation of the piston rod +/- | -0.45 deg ... 0.45 deg |
| Based on norm | ISO 15552 |
| Cushioning | Elastic cushioning rings/pads at both ends Self-adjusting pneumatic end-position cushioning Pneumatic cushioning, adjustable at both ends |
| Mounting position | Any |
| Conforms to standard | ISO 15552 |
| Piston rod end | External thread Internal thread |
| Structural design | Piston Piston rod Profile barrel |
| Position sensing | For proximity sensor |
| Symbol | 00991217 00991218 00991235 00991237 00991257 00991258 00991907 00991910 00992970 00992971 |
| Feature | Value |
| Variants | For unlubricated operation Clamping unit attached End-position locking at both ends End-position locking with piston rod retracted End-position locking with piston rod extended Increased chemical resistance Bellows on bearing cap Hard scraper Extended external thread piston rod Internal thread on piston rod Extended piston rod Low friction for balancer applications Metal scraper With anti-twist protection Uniform, slow movement Low friction Through piston rod Heat-resistant seals max. 120°C Sensor slots on 3 profile sides Temperature range 0 to + 150°C Temperature range -40 to 80°C Piston rod at one end |
| Method of operation clamping unit | Retracting Advancing Static Released by means of compressed air Frictional clamping via spring force |
| Static holding force of clamping unit | 5000 N |
| Axial backlash clamping unit | 0.8 mm |
| Clamping unit release pressure | 0.3 MPa |
| Clamping unit release pressure | 3 bar |
| Method of operation end-position locking | Positive locking by stop cylinder Released by means of compressed air |
| Static holding force of end-position locking | 5000 N |
| Axial backlash end-position locking | 1.5 mm |
| Unlocking pressure | ≥0.15 MPa |
| Unlocking pressure | ≥1.5 bar |
| Locking pressure | ≤0.05 MPa |
| Locking pressure | ≤0.5 bar |
| Operating pressure | 0.005 MPa ... 1.2 MPa |
| Operating pressure | 0.05 bar ... 12 bar |
| Mode of operation | Double-acting |
| CE marking (see declaration of conformity) | as per EU explosion protection directive (ATEX) |
| UKCA marking (see declaration of conformity) | acc. to UK EX instructions |
| Explosion prevention and protection | Zone 1 (ATEX) Zone 1 (UKEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 21 (UKEX) Zone 22 (ATEX) |
| ATEX category gas | II 2G |
| ATEX category for dust | II 2D |
| Type of ignition protection for gas | Ex h IICT4 Gb |
| Type of (ignition) protection for dust | Ex h IIICT120°C Db |
| Explosive ambient temperature | -20°C <= Ta <= +60°C |
| Explosion protection certification outside the EU | EPL Db (GB) EPL Gb (GB) |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Corrosion resistance class (CRC) | 2 - Moderate corrosion stress 3 - High corrosion stress |
| Feature | Value |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L VDMA24364 zone III |
| Ambient temperature | -40 °C ... 150 °C |
| Impact energy in the end positions | 1.25J ... 2.5J |
| Cushioning length | 0 mm ... 31 mm |
| Max. torque for protection against rotation | 3 Nm |
| Theoretical force at 6 bar, retracting | 4418 N |
| Theoretical force at 6 bar, advancing | 4418 N ... 4712 N |
| Weight surcharge per 10 mm piston rod extension | 39 g |
| Weight surcharge per 10 mm piston rod thread extension | 22 g |
| Type of mounting | Optionally: With internal thread With accessories |
| Pneumatic connection | G1/2 |
| Note on materials | RoHS-compliant |
| Cover material | Die-cast aluminum, coated |
| Material of spring | Spring steel High-alloy stainless steel |
| Clamping unit housing material | Wrought aluminum alloy, anodized |
| Housing end-position locking material | Wrought aluminum alloy, anodized |
| Piston seal material | FPM HNBR TPE-U(PU) |
| Clamping jaws clamping unit material | Brass |
| Piston clamping unit material | POM |
| Piston end-position locking material | Hardened steel |
| Material of piston | Wrought aluminum alloy |
| Piston rod material | high-alloy stainless steel, hard chrome plated High-alloy steel High-alloy stainless steel |
| Piston rod wiper material | FPM HNBR PE TPE-U(PU) |
| Buffer seal material | FPM TPE-U(PU) |
| Cushion piston material | Aluminum POM |
| Material of cylinder barrel | Wrought aluminum alloy, smooth-anodized |
| Nut material | Steel, galvanized |
| Rod wiper material | Brass PTFE-reinforced TPE-E |
| Material of bearing | Bronze Metal polymer compound POM |
| Flange screws material | Steel, galvanized |
| Bellows material | NBR PA |
| 1.Who we are We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands 2.Our advantage We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. I will try my best to give you the best price,prove that we are sincere. 3.Our Service Purpose We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal 4.Lead-Time Depending on thr model and quantity you need.So please tell us what you need now 5.Can't find the model you need? We have only shown some models,If the model you need is not found here,please contact us |
){kind=link}