1510sp-1 Pn for Et 200sp CPU PLC with Work Memory 100 Kb for Program and 750 Kb for Data PLC 6es7510-1DJ01-0ab0

• Customization: Available
• Task: Program
• Structure: Combination
• Model NO.: 6ES7510-1DJ01-0AB0
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Measurement
• Certification: CE
• Condition: New
• Customized: Non-Customized
• Material: Stainless Steel
• Part Number: 6es7510-1DJ01-0ab0
• Product Type Designation: CPU 1510sp-1 Pn
• Mode Selector Switch: 1
• Rated Value (DC): 24 V
• Number of Slots for Simatic Memory Card: 1
• Work Memory Integrated (for Program): 100 Kbyte
• Work Memory Integrated (for Data): 750
• Number of Profinet Interfaces: 1
• Transport Package: Carton
• Specification: 6ES7510-1DJ01-0AB0
• Trademark: AIMIQU
• Origin: Germany

Product Description

1510SP-1 PN for ET 200SP Central PLC with Work memory  6ES7510-1DJ01-0AB0

Data sheet                                                                                                          6ES7510-1DJ01-0AB0

SIMATIC DP, CPU 1510SP-1 PN for ET 200SP, Central processing unit with Work memory 100 KB for program and 750 KB for data, 1st interface: PROFINET IRT with 3-port swit72 ns bit performance, SIMATIC Memory Card required, BusAdapter required for Port 1 and 2
General information
Product type designation	CPU 1510SP-1 PN FS05 V2.9
HW functional status
Firmware version
Product function
I&M data Module swapping during operation (hot swapping) Isochronous mode	Yes; I&M0 to I&M3 Yes; Multi-hot swapping Yes; Only with PROFINET; with minimum OB 6x cycle of 625 µs
Engineering with
STEP 7 TIA Portal configurable/integrated from version	V17 (FW V2.9) / V13 SP1 Update 4 (FW V1.8) or higher
Configuration control
via dataset	Yes
Control elements
Mode selector switch	1
Supply voltage
Rated value (DC)	24 V 19.2 V 28.8 V Yes
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Reverse polarity protection
Mains buffering
Mains/voltage failure stored energy time	5 ms
Input current
Current consumption (rated value)	0.6 A 0.9 A 4.7 A; Rated value 0.14 A²·s
Current consumption, max.
Inrush current, max.
I²t
Power
Infeed power to the backplane bus	8.75 W
Power loss
Power loss, typ.	5.6 W
Memory
Number of slots for SIMATIC memory card	1 Yes
SIMATIC memory card required
Work memory
integrated (for program) integrated (for data)	100 kbyte 750 kbyte
Load memory
Plug-in (SIMATIC Memory Card), max.	32 Gbyte

 

Backup
maintenance-free	Yes
CPU processing times
for bit operations, typ.	72 ns 86 ns 115 ns 461 ns
for word operations, typ.
for fixed point arithmetic, typ.
for floating point arithmetic, typ.
CPU-blocks
Number of elements (total)	4 000; Blocks (OB, FB, FC, DB) and UDTs
DB
Number range   Size, max.	1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999 750 kbyte; For DBs with absolute addressing, the max. size is 64 KB
FB
Number range Size, max.	0 ... 65 535 100 kbyte
FC
Number range Size, max.	0 ... 65 535 100 kbyte
OB
Size, max. Number of free cycle OBs Number of time alarm OBs Number of delay alarm OBs Number of cyclic interrupt OBs Number of process alarm OBs Number of DPV1 alarm OBs Number of isochronous mode OBs Number of technology synchronous alarm OBs Number of startup OBs Number of asynchronous error OBs Number of synchronous error OBs Number of diagnostic alarm OBs	100 kbyte 100 20 20 20; With minimum OB 3x cycle of 500 µs 50 3 1 2 100 4 2 1
Nesting depth
per priority class	24
Counters, timers and their retentivity
S7 counter
Number	2 048
Retentivity
- adjustable	Yes
IEC counter
Number	Any (only limited by the main memory)
Retentivity
- adjustable	Yes
S7 times
Number	2 048
Retentivity
- adjustable	Yes
IEC timer
Number	Any (only limited by the main memory)
Retentivity
- adjustable	Yes
Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max.	128 kbyte; Available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB
Flag
Size, max. Number of clock memories	16 kbyte 8; 8 clock memory bit, grouped into one clock memory byte
Data blocks

 

Retentivity adjustable Retentivity preset	Yes No
Local data
per priority class, max.	64 kbyte; max. 16 KB per block
Address area
Number of IO modules	1 024; max. number of modules / submodules
I/O address area
Inputs Outputs	32 kbyte; All inputs are in the process image 32 kbyte; All outputs are in the process image
per integrated IO subsystem
Inputs (volume) Outputs (volume)	8 kbyte 8 kbyte
per CM/CP
Inputs (volume) Outputs (volume)	8 kbyte 8 kbyte
Subprocess images
Number of subprocess images, max.	32
Address space per module
Address space per module, max.	288 byte; For input and output data respectively
Address space per station
Address space per station, max.	2 560 byte; for central inputs and outputs; depending on configuration; 2 048 bytes for ET 200SP modules + 512 bytes for ET 200AL modules
Hardware configuration
Number of distributed IO systems	32; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link)
Number of DP masters
Via CM	1
Number of IO Controllers
integrated	1
Via CM	0
Rack
Modules per rack, max.	80; CPU + 64 modules + server module (mounting width max. 1 m) + 16
	ET 200AL modules
Quantity of operable ET 200SP modules, max.	64
Quantity of operable ET 200AL modules, max.	16
Number of lines, max.	1
PtP CM
Number of PtP CMs	the number of connectable PtP CMs is only limited by the number of available slots
Time of day
Clock
Type Backup time Deviation per day, max.	Hardware clock 6 wk; At 40 °C ambient temperature, typically 10 s; Typ.: 2 s
Operating hours counter
Number	16
Clock synchronization
supported	Yes
to DP, master	Yes; Via CM DP module
to DP, slave	Yes; Via CM DP module
in AS, master	Yes
in AS, slave	Yes
on Ethernet via NTP	Yes
Interfaces
Number of PROFINET interfaces	1 1; Via CM DP module No
Number of PROFIBUS interfaces
Optical interface

 

 

 

Shenzhen Aimiqu Technology Co., Ltd.

Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field.

 

Provide products, solutions and services for the majority of industrial enterprises and governments with automation systems, digital factories, industrial Internet and industrial big data intelligent integration, and strive to become a domestic intelligent manufacturing overall solution provider.


Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet.

And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories .

In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr...

 

Hot selling brand

Packing and shipping

                                                                                                                                                                                                              

FAQ
                                                                                                                                                                                                              

1.Who we are
  We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands

2.Our advantage
  We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. 
  I will try my best to give you the best price,prove that we are sincere. 

3.Our Service Purpose
   We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal

4.Lead-Time
   Depending on thr model and quantity you need.So please tell us what you need now 

5.Can't find the model you need?
   We have only shown some models,If the model you need is not found here,please contact us