6es7136-6dB00-0ca0 Simatic Dp Electronics Digital F-Output Modules PLC for Et 200sp F-Dq 4X24 V DC/2A 15 mm Width Brand New

• Task: Digita Output
• Structure: Closed-Loop
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Digita Output
• Certification: CE
• Model NO.: 6ES7136-6DB00-0CA0
• Condition: New
• Customized: Non-Customized
• Product Type Designation: F-Dq 4X24 V DC/2A Hf
• Width: 15 mm
• Height: 73 mm
• Depth: 58 mm
• Transport Package: Carton
• Specification: Weight, approx. 57 g
• Origin: German
• HS Code: 8538900000
• Production Capacity: 99999pieces/Year

Product Description

6ES7136-6DB00-0CA0 Digital F-output modules PLC

Data sheet                                                                                                         6ES7136-6DB00-0CA0

	SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)
	General information
	Product type designation	F-DQ 4x24 V DC/2A HF
	usable BaseUnits	BU type A0
	Product function
	I&M data	Yes; I&M0 to I&M3
	Engineering with
	STEP 7 TIA Portal configurable/integrated from version	V12
	STEP 7 configurable/integrated from version	V5.5 SP3 / -
	PROFINET from GSD version/GSD revision	V2.31
	Supply voltage
	Rated value (DC)	24 V
	permissible range, lower limit (DC)	20.4 V
	permissible range, upper limit (DC)	28.8 V
	Reverse polarity protection	Yes
	power supply according to NEC Class 2 required	No
	Input current
	Current consumption (rated value)	75 mA; without load
	Current consumption, max.	21 mA; From the backplane bus
	output voltage / header
	Rated value (DC)	24 V
	Power
	Power available from the backplane bus	70 mW
	Power loss
	Power loss, typ.	4 W
	Address area
	Address space per module
	Inputs	5 byte
	Outputs	5 byte
	Hardware configuration
	Automatic encoding Electronic coding element type F	Yes
		Yes
	Digital outputs
	Type of digital output	Transistor
	Number of digital outputs	4
	Digital outputs, parameterizable	Yes
	Short-circuit protection Response threshold, typ.	Yes
		> 3.3 A
	Open-circuit detection	Yes

 

	Response threshold, typ.	8 mA
	Overload protection Response threshold, typ.	Yes
		2.9 A
	Limitation of inductive shutdown voltage to	Typ. -2x 47 V
	Switching capacity of the outputs
	with resistive load, max.	2 A
	on lamp load, max.	10 W
	Load resistance range
	lower limit	12 ohm
	upper limit	2 000 ohm
	Output voltage
	for signal "1", min.	24 V; L+ (-0.5 V)
	Output current
	for signal "1" rated value	2 A
	for signal "0" residual current, max.	0.5 mA
	Switching frequency
	with resistive load, max.	30 Hz; Symmetrical
	with inductive load, max.	0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical
	on lamp load, max.	10 Hz; Symmetrical
	Total current of the outputs
	Current per channel, max.	2 A; note derating data in the manual
	Current per module, max.	6 A; note derating data in the manual
	Cable length
	shielded, max.	1 000 m
	unshielded, max.	500 m
	Interrupts/diagnostics/status information
	Diagnostics function	Yes
	Substitute values connectable	No
	Alarms
	Diagnostic alarm	Yes
	Diagnostics indication LED
	RUN LED	Yes; green LED
	ERROR LED	Yes; red LED
	Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
	Channel status display	Yes; green LED
	for channel diagnostics	Yes; red LED
	for module diagnostics	Yes; green/red DIAG LED
	Potential separation
	Potential separation channels
	between the channels	No
	between the channels and backplane bus	Yes
	between the channels and the power supply of the electronics	No
	Isolation
	Isolation tested with	707 V DC (type test)
	Standards, approvals, certificates
	Suitable for safety functions	Yes
	Highest safety class achievable in safety mode
	Performance level according to ISO 13849-1	PLe
	SIL acc. to IEC 61508	SIL 3
	Probability of failure (for service life of 20 years and repair time of 100 hours)
	- Low demand mode: PFDavg in accordance with SIL2	< 2.00E-04
	- Low demand mode: PFDavg in accordance with SIL3	< 2.00E-05
	- High demand/continuous mode: PFH in accordance with SIL2	< 1.00E-08 1/h
	- High demand/continuous mode: PFH in accordance with SIL3	< 1.00E-09 1/h
	Ambient conditions
	Ambient temperature during operation

 

horizontal installation, min. horizontal installation, max. vertical installation, min. vertical installation, max.	0 °C 60 °C 0 °C 50 °C
Altitude during operation relating to sea level
Installation altitude above sea level, max.	4 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width	15 mm 73 mm 58 mm
Height
Depth
Weights
Weight, approx.	57 g

 

 

 

 

Shenzhen Aimiqu Technology Co., Ltd.

Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field.

 

Provide products, solutions and services for the majority of industrial enterprises and governments with automation systems, digital factories, industrial Internet and industrial big data intelligent integration, and strive to become a domestic intelligent manufacturing overall solution provider.


Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet.

And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories .

In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr...

 

Hot selling brand

Packing and shipping

                                                                                                                                                                                                              

FAQ
                                                                                                                                                                                                              

1.Who we are
  We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands

2.Our advantage
  We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. 
  I will try my best to give you the best price,prove that we are sincere. 

3.Our Service Purpose
   We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal

4.Lead-Time
   Depending on thr model and quantity you need.So please tell us what you need now 

5.Can't find the model you need?
   We have only shown some models,If the model you need is not found here,please contact us