| Customization: | Available |
|---|---|
| Task: | Digita Input |
| Structure: | Closed-Loop |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| SIMATIC DP, POWER M. F-PM-E PPM PROFIsafe, for ET 200SP; 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3 2 for safe dig. inputs 1 for safe dig. output PPM |
|||
| General information | |||
| Product type designation | F-PM-E 24 V DC/8 A PPM ST | ||
| usable BaseUnits | BU type C0 | ||
| Color code for module-specific color identification plate | CC52 | ||
| Product function | |||
|
Yes; I&M0 to I&M3 | ||
| Engineering with | |||
|
V12 | ||
|
V5.5 SP3 / - | ||
|
V2.31 | ||
| Supply voltage | |||
| Rated value (DC) | 24 V | ||
| permissible range, lower limit (DC) | 20.4 V | ||
| permissible range, upper limit (DC) | 28.8 V | ||
| Reverse polarity protection | Yes | ||
| Input current | |||
| Current consumption (rated value) | 75 mA; without load | ||
| Current consumption, max. | 21 mA; From the backplane bus | ||
| output voltage / header | |||
| Rated value (DC) | 24 V | ||
| Encoder supply | |||
| Number of outputs | 2 | ||
| Short-circuit protection | Yes; Electronic (response threshold 0.7 A to 2.1 A) | ||
| Output current | |||
|
0.3 A | ||
| 24 V encoder supply | |||
|
Yes; min. L+ (-1.5 V) | ||
|
Yes | ||
|
600 mA; Total current of all encoders | ||
| Power | |||
| Power available from the backplane bus | 70 mW | ||
| Power loss | |||
| Power loss, typ. | 5 W | ||
| Address area | |||
| Address space per module | |||
|
7 byte | ||
|
5 byte | ||
| Hardware configuration | |||
Automatic encoding
|
Yes Yes |
| Digital inputs | |
| Number of digital inputs | 2 Yes; P-reading Yes |
| Source/sink input | |
| Input characteristic curve in accordance with IEC 61131, type 1 | |
| Input voltage | |
|
DC 24 V -30 to +5 V +15 to +30 V |
| Input current | |
|
3.7 mA |
| Input delay (for rated value of input voltage) | |
| for standard inputs | |
| - parameterizable - at "0" to "1", min. - at "0" to "1", max. - at "1" to "0", min. - at "1" to "0", max. |
Yes 0.4 ms 20 ms 0.4 ms 20 ms |
| for technological functions | |
| - parameterizable | No |
| Cable length | |
|
1 000 m 500 m |
| Digital outputs | |
| Number of digital outputs | 1 Yes > 14.8 A Yes 8 mA Yes 8.8 A Max. -1.5 V |
Short-circuit protection
|
|
Open-circuit detection
|
|
Overload protection
|
|
| Limitation of inductive shutdown voltage to | |
| Switching capacity of the outputs | |
|
8 A 100 W |
| Load resistance range | |
|
3 ohm 2 000 ohm |
| Output voltage | |
|
24 V; L+ (-0.5 V) |
| Output current | |
|
8 A 1.5 mA; PP-switching: max. 1.5 mA; PM-switching: max. 1 mA |
| Switching frequency | |
|
10 Hz; Symmetrical 0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical 4 Hz; Symmetrical |
| Total current of the outputs | |
|
8 A; note derating data in the manual 8 A; note derating data in the manual |
| Cable length | |
|
1 000 m 500 m |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes; See Chapter "Alarms/diagnostic messages" in the manual No |
| Substitute values connectable | |
| Alarms | |
|
Yes No |
| Diagnostics indication LED | |
|
Yes; green LED Yes; red LED Yes; green PWR LED Yes; green LED Yes; red LED Yes; green/red DIAG LED |
| Potential separation | |
| Potential separation channels | |
|
No Yes No |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Standards, approvals, certificates | |
| Suitable for safety functions | Yes |
| Highest safety class achievable in safety mode | |
|
PLe SIL 3 |
| Ambient conditions | |
| Ambient temperature during operation | |
|
0 °C 60 °C 0 °C 50 °C |
| Dimensions | |
| Width | 20 mm 73 mm 55 mm |
| Height | |
| Depth | |
| Weights | |
| Weight, approx. | 70 g |
| Shenzhen Aimiqu Technology Co., Ltd. |
Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field. Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet. And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories . In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr... |
| 1.Who we are We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands 2.Our advantage We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. I will try my best to give you the best price,prove that we are sincere. 3.Our Service Purpose We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal 4.Lead-Time Depending on thr model and quantity you need.So please tell us what you need now 5.Can't find the model you need? We have only shown some models,If the model you need is not found here,please contact us |
){kind=link}