• New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49
  • New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49
  • New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49
  • New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49
  • New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49
  • New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49

New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49

Type: Diffuse Reflection Type Photoelectric Sensor
Output Signal Type: Switching Type
Material: PC
Feature: Low Temperature Resistant
IP Rating: IP67
Certification: cULus
Customization:
Diamond Member Since 2022

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
DK10-LAS/35/49
Customized
Non-Customized
Transport Package
Carton
Specification
DK10-LAS/35/49
Trademark
AIMIQU
Origin
Singapore
HS Code
8481100090
Production Capacity
9999999pieces/Year

Product Description

Pepperl+Fuchs Print mark contrast sensor DK10-LAS/35/49
 
  • Laser print mark contrast sensor for recording very small print marks
  • Laser class 2, eyesafe
  • Adjustable sensitivity
  • 30 µs response time, suitable for extremely rapid scanning processes
General specifications
Sensor range   800 mm
Detection range   3 ... 800 mm
Light source   laser diode
Light type   modulated visible red light
Laser nominal ratings    
Note   LASER LIGHT , DO NOT STARE INTO BEAM
Laser class   2
Wave length   650 nm
Beam divergence   < 1.5 mrad
Pulse length   1.5 µs
Repetition rate   108.7 kHz
max. pulse energy   2.1  nJ
Light spot representation   approx. 2 mm at a distance of 800 mm
Ambient light limit    
Continuous light   40000 Lux
Functional safety related parameters
MTTFd   550 a
Mission Time (TM)   20 a
Diagnostic Coverage (DC)   60 %
Indicators/operating means
Function indicator   LED yellow: lights up if receiver is lit (light on), lights up if receiver is not lit (dark on)
Control elements   Light-on/dark-on changeover switch, sensitivity adjuster
Electrical specifications
Operating voltage UB 10 ... 30 V DC
Ripple   10 %
No-load supply current I0 ≤ 55 mA
Input
Test input   emitter deactivation with +Ub
Output
Switching type   light/dark on switchable
Signal output   1 PNP and 1 NPN short-circuit protected, open collector, synchronized-switching
Switching voltage   max. 30 V DC
Switching current   max. 200 mA
Switching frequency f 16.5 kHz
Response time   30 µs
Conformity
Product standard   EN 60947-5-2
Laser safety   IEC 60825-1:2007
Compliance with standards and directives
Standard conformity    
Shock and impact resistance   IEC / EN 60068. half-sine, 40 g in each X,Y and Z directions
Vibration resistance   IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X,Y and Z directions
Approvals and certificates
EAC conformity   TR CU 020/2011
UL approval   cULus Listed , Class 2 power source
CCC approval   CCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature   -10 ... 50 °C (14 ... 122 °F)
Storage temperature   -20 ... 75 °C (-4 ... 167 °F)
Mechanical specifications
Housing width   33 mm
Housing height   85.6 mm
Housing depth   60.8 mm
Degree of protection   IP67
Connection   5-pin, M12 x 1 connector
Material    
Housing   PC (glass-fiber-reinforced Makrolon)
Optical face   glass
Mass   200 g
New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49New and Original Pepperl+Fuchs Print Mark Contrast Sensor Dk10-Las/35/49


 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now