New 6es7522-5hf00-0ab0 Electrical PLC for Siemens Simatic S7-1500 Digital Output Module Dq 8 X 230VAC/5A Relay

• Customization: Available
• Task: Following
• Function: Digital Output
• Model NO.: 6ES7522-5HF00-0AB0
• Certification: CE
• Condition: New
• Customized: Non-Customized
• Transport Package: Carton
• Origin: German
• HS Code: 8537101190
• Production Capacity: 9999pices/Year

Product Description

6ES7522-5HF00-0AB0 PLC for Siemens SIMATIC S7-1500 digital output module DQ 8 X 230VAC/5A RELAY Original and unopened

SIMATIC S7-1500, digital output module DQ 8xAC 230V/5A ST; relay; 8 channels in groups of 1; 5 A per group; diagnostics; substitute value: switching cycle counter for integrated relay, the module supports the safety-oriented shutdown of load groups up to SIL1 according to EN IEC 62061:2021 and Category 2 / PL c according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately.

Data sheet 6ES7522-5HF00-0AB0
SIMATIC S7-1500, digital output module DQ 8xAC 230V/5A ST; relay; 8 channels in groups of 1; 5 A per group; diagnostics; substitute value: switching cycle counter for integrated relay, the module supports the safety- oriented shutdown of load groups up to SIL1 according to EN IEC 62061:2021 and Category 2 / PL c according to EN ISO 13849-1:2015. front connector (screw terminals or push-in) to be ordered separately
 

General information
Product type designation	DQ 8x230 V AC/5 A ST (relay)
HW functional status	From FS02
Firmware version	V2.1.0
FW update possible	Yes

    Product function

• I&M data Yes; I&M0 to I&M3
• Isochronous mode No
• Prioritized startup Yes

    Engineering with

 

• STEP 7 TIA Portal configurable/integrated from version
• STEP 7 configurable/integrated from version
• PROFIBUS from GSD version/GSD revision
• PROFINET from GSD version/GSD revision

V12 / V12

V5.5 SP3 / - V1.0 / V5.1 V2.3 / -

 

    Operating mode

DQ DQ with energy-saving function PWM Oversampling MSO Integrated operating cycle counter	Yes No No No Yes Yes; FW V2.1.0 or higher
Supply voltage
Rated value (DC) permissible range, lower limit (DC) permissible range, upper limit (DC) Reverse polarity protection	24 V 19.2 V 28.8 V Yes
Input current
Current consumption, max.	80 mA
output voltage / header
Rated value (AC)	230 V; 24 V DC to 120 V DC / 24 V AC to 230 V AC
Power
Power available from the backplane bus	0.8 W
Power loss
Power loss, typ.	5 W
Digital outputs
Type of digital output Number of digital outputs Current-sinking	Relays 8 Yes

 

Current-sourcing Digital outputs, parameterizable Short-circuit protection Controlling a digital input Size of motor starters according to NEMA, max.	Yes Yes No Yes; possible 5
Switching capacity of the outputs
on lamp load, max. Low energy/fluorescent lamps with electronic control gear Fluorescent tubes, conventionally compensated Fluorescent tubes, uncompensated	1 500 W; 10 000 operating cycles 10x 58 W (25 000 operating cycles) 1x 58 W (25 000 operating cycles) 10x 58 W (25 000 operating cycles)
Output current
for signal "1" rated value for signal "1" permissible range, min. for signal "1" permissible range, max. for signal "0" residual current, max.	5 A 5 mA; 10 V 8 A; thermal continuous current 0 A
Parallel switching of two outputs
for logic links for uprating for redundant control of a load	Yes No Yes
Switching frequency
with resistive load, max. with inductive load, max. on lamp load, max.	2 Hz 0.5 Hz 2 Hz
Total current of the outputs
Current per channel, max. Current per group, max. Current per module, max.	8 A; see additional description in the manual 8 A; see additional description in the manual 64 A; see additional description in the manual
Relay outputs
Number of relay outputs Rated supply voltage of relay coil L+ (DC) Current consumption of relays (coil current of all relays), typ. external protection for relay outputs   Contact connection (internal) Number of operating cycles, max. Relay approved acc. to UL 508	8 24 V 80 mA With miniature circuit breaker with characteristic B for: cos φ 1.0: 600 A cos φ 0.5 0.7: 900 A with 8 A Diazed fuse: 1 000 A No 4 000 000; see additional description in the manual Yes; 250 V AC/5 A g.p.; 120 V AC TV-4 tungsten; A300, R300
Switching capacity of contacts
with inductive load, max. with resistive load, max.	see additional description in the manual see additional description in the manual
Cable length
shielded, max. unshielded, max.	1 000 m 600 m
Interrupts/diagnostics/status information
Diagnostics function Substitute values connectable	Yes Yes
Alarms

• Diagnostic alarm Yes

    Diagnoses

• Monitoring the supply voltage Yes
• Wire-break No
• Short-circuit No

    Diagnostics indication LED

RUN LED ERROR LED MAINT LED Monitoring of the supply voltage (PWR-LED) Channel status display for channel diagnostics for module diagnostics	Yes; green LED Yes; red LED Yes; Yellow LED Yes; green LED Yes; green LED No Yes; red LED
Potential separation
Potential separation channels

• between the channels Yes; Switching of different phases permitted

 

between the channels, in groups of between the channels and backplane bus Between the channels and load voltage L+	1 Yes Yes
Permissible potential difference
between different circuits	250 V AC between the channels and the supply voltage L+, 250 V AC between the channels and the backplane bus; 250 V AC between the channels (500 V AC when connecting different phases; basic insulation)
Isolation
Isolation tested with	between the channels: 3 100 V DC; between the channels and the backplane bus: 3 100 V DC; between the channels and the supply voltage L+: 3 100 V DC; between the L+ and the backplane bus: 707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions Suitable for safety-related tripping of standard modules	No Yes; From FS03

    Highest safety class achievable for safety-related tripping of standard modules

Performance level according to ISO 13849-1 Category according to ISO 13849-1	PL c Cat. 2
Ambient conditions
Ambient temperature during operation
horizontal installation, min. horizontal installation, max. vertical installation, min. vertical installation, max.	-30 °C; From FS03 60 °C -30 °C; From FS03 40 °C
Dimensions
Width Height Depth	35 mm 147 mm 129 mm
Weights

Weight, approx. 350 g

 

 

 

 

Shenzhen Aimiqu Technology Co., Ltd.

Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field.

 

Provide products, solutions and services for the majority of industrial enterprises and governments with automation systems, digital factories, industrial Internet and industrial big data intelligent integration, and strive to become a domestic intelligent manufacturing overall solution provider.


Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet.

And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories .

In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr...

 

Hot selling brand

Packing and shipping

                                                                                                                                                                                                              

FAQ
                                                                                                                                                                                                              

1.Who we are
  We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands

2.Our advantage
  We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. 
  I will try my best to give you the best price,prove that we are sincere. 

3.Our Service Purpose
   We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal

4.Lead-Time
   Depending on thr model and quantity you need.So please tell us what you need now 

5.Can't find the model you need?
   We have only shown some models,If the model you need is not found here,please contact us