| Task: | Connect |
|---|---|
| Mathematical Model: | Linear |
| Signal: | Continuous |
| Function: | Connect |
| Certification: | CE |
| Condition: | New |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
When using PROFINET interface modules, the following basic functions are also included:
| SIMATIC ET 200SP, PROFINET bundle IM, IM 155-6PN ST, max. 32 I/O modules and 16 ET 200AL modules, single hot swap, bundle consists of: Interface module (6ES7155-6AU01-0BN0), Server module (6ES7193- 6PA00-0AA0), BusAdapter BA 2xRJ45 (6ES7193-6AR00-0AA0) |
|||
| General information | |||
| Product type designation | IM 155-6 PN ST | ||
| HW functional status | FS01 | ||
Firmware version
|
Yes |
||
| Product function | |||
|
Yes; I&M0 to I&M3 | ||
|
Yes; Single hot swapping | ||
|
No | ||
| Engineering with | |||
|
V14 | ||
|
V5.5 SP4 and higher | ||
|
V2.3 / - | ||
| Configuration control | |||
| via dataset | Yes | ||
| Supply voltage | |||
| Rated value (DC) | 24 V | ||
| permissible range, lower limit (DC) | 19.2 V | ||
| permissible range, upper limit (DC) | 28.8 V | ||
| Reverse polarity protection | Yes | ||
| Short-circuit protection | Yes | ||
| Mains buffering | |||
|
10 ms | ||
| Input current | |||
| Current consumption (rated value) | 450 mA | ||
| Current consumption, max. | 550 mA | ||
| Inrush current, max. | 3.7 A | ||
| I²t | 0.09 A²·s | ||
| Power | |||
| Infeed power to the backplane bus | 4.5 W | ||
| Power loss | |||
| Power loss, typ. | 1.9 W | ||
| Address area | |||
| Address space per module | |||
|
256 byte; per input / output | ||
| Address space per station | |||
|
512 byte; Dependent on configuration | ||
| Hardware configuration | |||
| Rack | |
|
32 |
|
16 |
| Submodules | |
|
256 |
| Interfaces | |
| Number of PROFINET interfaces | 1; 2 ports (switch) |
| 1. Interface | |
| Interface types | |
|
Yes; Pre-assembled BusAdapter BA 2x RJ45 |
|
2 |
|
Yes |
|
Yes; compatible BusAdapters: BA 2x RJ45, BA 2x FC, BA 2x M12 |
| Protocols | |
|
Yes Yes Yes; PROFINET MRP |
| Interface types | |
| RJ 45 (Ethernet) | |
|
PROFINET with 100 Mbit/s full duplex (100BASE-TX) |
|
Yes; PROFINET with 100 Mbit/s full duplex (100BASE-TX) |
|
Yes |
|
Yes |
| Protocols | |
| PROFINET IO Device | |
| Services | |
| - IRT | Yes; with send cycles of between 250 µs and 4 ms in increments of 125 µs |
| - PROFIenergy | Yes |
| - Prioritized startup | Yes |
| - Shared device | Yes |
| - Number of IO Controllers with shared device, max. | 2 |
| Redundancy mode | |
|
No |
| Media redundancy | |
|
Yes No |
| Open IE communication | |
|
Yes Yes Yes |
| Interrupts/diagnostics/status information | |
| Status indicator | Yes Yes Yes |
| Alarms | |
| Diagnostics function | |
| Diagnostics indication LED | |
|
Yes; green LED |
|
Yes; red LED |
|
Yes; Yellow LED |
|
Yes; green PWR LED |
|
Yes; 2x green link LEDs on BusAdapter |
| Potential separation | |
| between backplane bus and electronics | No Yes; 1 500 V AC No |
| between PROFINET and all other circuits | |
| between supply and all other circuits | |
| Permissible potential difference | |
| between different circuits | Safety extra low voltage SELV |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Standards, approvals, certificates | |
| Network loading class | 2 According to Security Level 1 Test Cases V1.1.1 |
| Security level | |
| Ambient conditions | |
| Ambient temperature during operation | |
|
0 °C 60 °C 0 °C 50 °C |
| Altitude during operation relating to sea level | |
|
5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| connection method / header | |
| ET-Connection | |
|
Yes; + 16 ET 200AL modules |
| Dimensions | |
| Width | 50 mm 117 mm 74 mm |
| Height | |
| Depth | |
| Weights | |
| Weight, approx. | 190 g; IM 155-6 PN BA with 2x RJ45 ports and server module |
| Shenzhen Aimiqu Technology Co., Ltd. |
Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field. Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet. And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories . In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr... |
| 1.Who we are We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands 2.Our advantage We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. I will try my best to give you the best price,prove that we are sincere. 3.Our Service Purpose We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal 4.Lead-Time Depending on thr model and quantity you need.So please tell us what you need now 5.Can't find the model you need? We have only shown some models,If the model you need is not found here,please contact us |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}