6es7136-6PA00-0bc0 Special Fail-Safe Modules Power Module Original Industrial PLC for Et 200sp for Siemens

• Task: Digita Input
• Structure: Closed-Loop
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Digita Input
• Certification: CE
• Model NO.: 6ES7136-6PA00-0BC0
• Condition: New
• Customized: Non-Customized
• Product Type Designation: F-Dq 4X24 V DC/2A Hf
• Width: 15 mm
• Height: 73 mm
• Depth: 58 mm
• Transport Package: Carton
• Specification: Weight, approx. 57g
• Origin: German
• HS Code: 8538900000
• Production Capacity: 99999pieces/Year

Product Description

6ES7136-6PA00-0BC0   power module PLC for  ET 200SP

Data sheet                                                                                                          6ES7136-6PA00-0BC0

	SIMATIC DP, POWER M. F-PM-E PPM PROFIsafe, for ET 200SP; 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3 2 for safe dig. inputs 1 for safe dig. output PPM
	General information
	Product type designation	F-PM-E 24 V DC/8 A PPM ST
	usable BaseUnits	BU type C0
	Color code for module-specific color identification plate	CC52
	Product function
	I&M data	Yes; I&M0 to I&M3
	Engineering with
	STEP 7 TIA Portal configurable/integrated from version	V12
	STEP 7 configurable/integrated from version	V5.5 SP3 / -
	PROFINET from GSD version/GSD revision	V2.31
	Supply voltage
	Rated value (DC)	24 V
	permissible range, lower limit (DC)	20.4 V
	permissible range, upper limit (DC)	28.8 V
	Reverse polarity protection	Yes
	Input current
	Current consumption (rated value)	75 mA; without load
	Current consumption, max.	21 mA; From the backplane bus
	output voltage / header
	Rated value (DC)	24 V
	Encoder supply
	Number of outputs	2
	Short-circuit protection	Yes; Electronic (response threshold 0.7 A to 2.1 A)
	Output current
	up to 60 °C, max.	0.3 A
	24 V encoder supply
	24 V	Yes; min. L+ (-1.5 V)
	Short-circuit protection	Yes
	Output current, max.	600 mA; Total current of all encoders
	Power
	Power available from the backplane bus	70 mW
	Power loss
	Power loss, typ.	5 W
	Address area
	Address space per module
	Inputs	7 byte
	Outputs	5 byte
	Hardware configuration

 

Automatic encoding Electronic coding element type F	Yes Yes
Digital inputs
Number of digital inputs	2 Yes; P-reading Yes
Source/sink input
Input characteristic curve in accordance with IEC 61131, type 1
Input voltage
Type of input voltage Rated value (DC) for signal "0" for signal "1"	DC 24 V -30 to +5 V +15 to +30 V
Input current
for signal "1", typ.	3.7 mA
Input delay (for rated value of input voltage)
for standard inputs
- parameterizable - at "0" to "1", min. - at "0" to "1", max. - at "1" to "0", min. - at "1" to "0", max.	Yes 0.4 ms 20 ms 0.4 ms 20 ms
for technological functions
- parameterizable	No
Cable length
shielded, max. unshielded, max.	1 000 m 500 m
Digital outputs
Number of digital outputs	1 Yes > 14.8 A Yes 8 mA Yes 8.8 A Max. -1.5 V
Short-circuit protection Response threshold, typ.
Open-circuit detection Response threshold, typ.
Overload protection Response threshold, typ.
Limitation of inductive shutdown voltage to
Switching capacity of the outputs
with resistive load, max. on lamp load, max.	8 A 100 W
Load resistance range
lower limit upper limit	3 ohm 2 000 ohm
Output voltage
for signal "1", min.	24 V; L+ (-0.5 V)
Output current
for signal "1" rated value for signal "0" residual current, max.	8 A 1.5 mA; PP-switching: max. 1.5 mA; PM-switching: max. 1 mA
Switching frequency
with resistive load, max. with inductive load, max. on lamp load, max.	10 Hz; Symmetrical 0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical 4 Hz; Symmetrical
Total current of the outputs
Current per channel, max. Current per module, max.	8 A; note derating data in the manual 8 A; note derating data in the manual
Cable length
shielded, max. unshielded, max.	1 000 m 500 m
Interrupts/diagnostics/status information
Diagnostics function	Yes; See Chapter "Alarms/diagnostic messages" in the manual No
Substitute values connectable
Alarms

 

Diagnostic alarm Hardware interrupt	Yes No
Diagnostics indication LED
RUN LED ERROR LED Monitoring of the supply voltage (PWR-LED) Channel status display for channel diagnostics for module diagnostics	Yes; green LED Yes; red LED Yes; green PWR LED Yes; green LED Yes; red LED Yes; green/red DIAG LED
Potential separation
Potential separation channels
between the channels between the channels and backplane bus between the channels and the power supply of the electronics	No Yes No
Isolation
Isolation tested with	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions	Yes
Highest safety class achievable in safety mode
Performance level according to ISO 13849-1 SIL acc. to IEC 61508	PLe SIL 3
Ambient conditions
Ambient temperature during operation
horizontal installation, min. horizontal installation, max. vertical installation, min. vertical installation, max.	0 °C 60 °C 0 °C 50 °C
Dimensions
Width	20 mm 73 mm 55 mm
Height
Depth
Weights
Weight, approx.	70 g

Shenzhen Aimiqu Technology Co., Ltd is a high-tech enterprise integrating industrial control product sales, automation engineering design, development and transformation. There are reliable teams with our company, for a variety of industries automation process control needs, to provide reliable, efficient services and automation overall solution.

established in March 2016, the business scope including general management project is automation equipment accessories, instruments and meters, valves, switches, electronic semiconductor, electronic products, digital products, electronic components, communications products, computer software and hardware, security equipment, energy conservation and environmental protection products, intelligent household products; Operating electronic commerce; Domestic trade, import and export of goods and technology. Electrical automation import and export trade for the main business.

 Since its establishment, Aimiqu has been providing industrial automation services, providing customers with high-quality products and automation solutions. In the long-term business process, Emicic has established good partnerships with well-known international manufacturers .


  At the same time, attaches great importance to product research and development, invested a lot of funds, independent production and development of electrical equipment such as power distribution cabinet and put into use. For customers in product performance testing, automated production lines, electronic equipment, wire and cable, and other aspects of energy saving equipment reform and development, design, transform the multitude of automation equipment and automation control system, and provide a reliable and professional support, and pre-sale, sale and after-sale services - dragon, by the customer the consistent high praise.

Welcome to !