6es7136-6ra00-0bf0 Et200sp Digital Relay Output Module PLC

• Task: Digital Output
• Structure: Closed-Loop
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Digital Output
• Certification: CE
• Model NO.: 6ES7136-6RA00-0BF0
• Condition: New
• Customized: Non-Customized
• Product Type Designation: F-Rq 24 ... 48VDC/24 ... 230VAC/5A St
• Width: 20 mm
• Height: 73 mm
• Depth: 58 mm
• Transport Package: Carton
• Specification: Weight, approx. 56g
• Origin: German
• HS Code: 8538900000
• Production Capacity: 99999pieces/Year

Product Description

6ES7136-6RA00-0BF0 ET200SP Digital F-output module relay PLC

Digital F-output module relay
Overview

The digital F electronic module relay 1 F-RQ DC 24VDC/24.230VAC/5 A has the following characteristics:

• 1 relay output (2 NO contacts)
• Total output current 5 A
• Rated load voltage 24 V DC and 24 ... 230 V AC
• The control circuit of the two safety relays must be routed from the outside to the respective terminals

The attainable safety integrity level is SIL 3 (IEC 61508) when the control of the F-RQ module is implemented via a fail-safe output (e.g. ET 200SP 4F-DQ 24 V DC/2 A PROFIsafe).

 

 

Application

The 1 F-RQ module is very versatile and can be used in multiple ways, e.g.

• for switching of external voltages,
• when floating signals are needed,
• for controller releases,
• when higher switching capacities (> 2 A) or other voltage levels are needed.

 

Design

Control must be carried out from the outside via a fail-safe electronic module to the respective IN P and IN M terminals. The ET 200SP 4 F-DQ (6ES7136-6DB00-0CA0) can be used for this, for example.

One channel of the 4 F-DQ module can be used to control a further 1 F-RQ module. The output signal can be looped through for this purpose: OUT P and OUT M of the first 1F-RQ module are wired to IN P and IN M of the second 1F-RQ module.

Data sheet                                                                                                          6ES7136-6RA00-0BF0

SIMATIC DP, Electronics module f. ET200SP, F-RQ 1x 24 V DC/24..230VAC/5A ST, 20 mm overall width, 1 relay output (2 NO) Summation output current 5 A, load voltage 24 V DC and 24.. 230 V AC, Can be used up to PL E (ISO 13849-1: 2008)/ SIL 3 (IEC 61508: 2010) if control takes place by (e.g. 6ES7136-6DB00-0CA0) F-DQ
General information
Product type designation	F-RQ 24 ... 48VDC/24 ... 230VAC/5A ST BU type F0 CC42
usable BaseUnits
Color code for module-specific color identification plate
Product function
I&M data	Yes; I&M0 to I&M3
Engineering with
STEP 7 TIA Portal configurable/integrated from version STEP 7 configurable/integrated from version PROFINET from GSD version/GSD revision	V13 V5.5 SP4 and higher V2.31
Supply voltage
Rated value (DC)	24 V; Coil voltage 20.4 V 28.8 V No
permissible range, lower limit (DC)
permissible range, upper limit (DC)
power supply according to NEC Class 2 required
Power
Power available from the backplane bus	100 mW
Power loss
Power loss, typ.	1 W
Address area
Address space per module
Inputs	1 byte
Hardware configuration
Automatic encoding Mechanical coding element Type of mechanical coding element	Yes Yes type C
Digital outputs
Type of digital output	Relays 1 No Yes
Number of digital outputs
Limitation of inductive shutdown voltage to
Controlling a digital input
Switching capacity of the outputs
with resistive load, max. on lamp load, max.	5 A 25 W
Switching frequency
with resistive load, max. with inductive load, max. with inductive load (acc. to IEC 60947-5-1, DC13),	2 Hz 0.1 Hz; See data in manual 0.1 Hz

 

max. with inductive load (acc. to IEC 60947-5-1, AC15), max.	2 Hz
Total current of the outputs (per module)
horizontal installation
up to 40 °C, max. up to 50 °C, max. up to 60 °C, max.	5 A; note derating data in the manual 4 A; note derating data in the manual 3 A; note derating data in the manual
vertical installation
- up to 50 °C, max.	3 A; note derating data in the manual
Relay outputs
Number of relay outputs Rated supply voltage of relay coil L+ (DC) Current consumption of relays (coil current of all relays), max. external protection for relay outputs Relay approved acc. to UL 508	1; 2 NO contacts 24 V 70 mA yes; 6 A, see data in manual Yes; Pilot Duty B300, R300
Switching capacity of contacts
with inductive load, max. with resistive load, max. Thermal continuous current, max. Switching current, min. Switching current after exceeding 300 mA, min. Switching current after exceeding 300 mA, max. Rated switching voltage (DC) Rated switching voltage (AC)	see additional description in the manual see additional description in the manual 5 A 1 mA 10 mA 5 A 24 V 230 V
Cable length
shielded, max. unshielded, max. Control cable (input), max.	500 m; for load contacts 300 m; for load contacts 10 m
Interrupts/diagnostics/status information
Diagnostics function	Yes
Diagnostics indication LED
RUN LED Channel status display	Yes; green/red DIAG LED Yes; green LED
Potential separation
Potential separation channels
between the channels between the channels and backplane bus between the channels and the power supply of the electronics	Yes; for SELV / PELV only Yes Yes
Permissible potential difference
between channels and backplane bus/supply voltage	250 V AC (reinforced insulation)
Isolation
Isolation tested with	2 545 V DC/2 s (routine test) III
Overvoltage category
tested with
between channels and backplane bus/supply voltage between backplane bus and supply voltage	DC 2 545 V 2 s (routine test), impulse voltage test DC 7 200 V / 5 positive and 5 negative pulses (type test) 707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions	Yes
Highest safety class achievable in safety mode
Performance level according to ISO 13849-1 Category according to ISO 13849-1 SIL acc. to IEC 61508	PLe 4 SIL 3
Probability of failure (for service life of 20 years and repair time of 100 hours)
Low demand mode: PFDavg in accordance with SIL2 Low demand mode: PFDavg in accordance	< 1.00E-04, function test 1x per year < 1.00E-05, function test 1x per month

 

with SIL3 High demand/continuous mode: PFH in accordance with SIL2 High demand/continuous mode: PFH in accordance with SIL3	< 1.00E-08 1/h, function test 1x per year < 6.00E-09 1/h, function test 1x per month
Ambient conditions
Ambient temperature during operation
horizontal installation, min. horizontal installation, max. vertical installation, min. vertical installation, max.	0 °C 60 °C 0 °C 50 °C
Dimensions
Width	20 mm 73 mm 58 mm
Height
Depth
Weights
Weight, approx.	56 g

 

Shenzhen Aimiqu Technology Co., Ltd.

Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field. Provide products, solutions and services for the majority of industrial enterprises and governments with automation systems, digital factories, industrial Internet and industrial big data intelligent integration, and strive to become a domestic intelligent manufacturing overall solution provider.


Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet.

And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories .

In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr...

Hot selling brand

Packing and shipping

                                                                                                                                                                                                              

FAQ
                                                                                                                                                                                                              

1.Who we are
  We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands

2.Our advantage
  We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. 
  I will try my best to give you the best price,prove that we are sincere. 

3.Our Service Purpose
   We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal

4.Lead-Time
   Depending on thr model and quantity you need.So please tell us what you need now 

5.Can't find the model you need?
   We have only shown some models,If the model you need is not found here,please contact us