| Customization: | Available |
|---|---|
| Task: | Collect |
| Structure: | Closed-Loop |
|
Still deciding? Get samples of US$ 600/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| SIMATIC ET 200SP, Analog input module, AI 2x U/I 2-.4-wire High Speed, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.3% |
|
| General information | |
| Product type designation | AI 2xU/I 2-/4-wire HS From FS07 Yes BU type A0, A1 CC00 |
| HW functional status | |
Firmware version
|
|
| usable BaseUnits | |
| Color code for module-specific color identification plate | |
| Product function | |
|
Yes; I&M0 to I&M3 |
|
Yes |
|
No |
|
No |
|
No |
| Engineering with | |
|
V13 SP1 |
|
V5.5 SP3 / - |
|
One GSD file each, Revision 3 and 5 and higher |
|
GSDML V2.3 |
| Operating mode | |
|
Yes; 2 channels per module No |
| CiR - Configuration in RUN | |
| Reparameterization possible in RUN | Yes No |
| Calibration possible in RUN | |
| Supply voltage | |
| Rated value (DC) | 24 V 19.2 V 28.8 V Yes |
| permissible range, lower limit (DC) | |
| permissible range, upper limit (DC) | |
| Reverse polarity protection | |
| Input current | |
| Current consumption (rated value) | 39 mA; without sensor supply |
| Encoder supply | |
| 24 V encoder supply | |
|
Yes; For current measurement Yes 20 mA; max. 50 mA per channel for a duration < 10 s |
| Power loss | |
| Power loss, typ. | 0.95 W; without sensor supply |
| Address area | |
| Address space per module | |
|
4 byte; + 1 byte for QI information (32 bytes in the oversampling operating mode) |
| Hardware configuration | |
Automatic encoding
|
Yes Yes Type A |
| Selection of BaseUnit for connection variants | |
|
BU type A0, A1 BU type A0, A1 |
| Analog inputs | |
Number of analog inputs
|
2; Differential inputs 2 2 30 V 50 mA 125 µs Yes 16 50 µs |
| permissible input voltage for voltage input (destruction limit), max. | |
| permissible input current for current input (destruction limit), max. | |
| Cycle time (all channels), min. | |
Analog input with oversampling
|
|
| Input ranges (rated values), voltages | |
|
Yes; 15 bit 75 kohm Yes; 13 bit 75 kohm Yes; 16 bit incl. sign 75 kohm Yes; 15 bit incl. sign 75 kohm |
| Input ranges (rated values), currents | |
|
Yes; 15 bit 130 ohm Yes; 16 bit incl. sign 130 ohm Yes; 14 bit 130 ohm |
| Cable length | |
|
1 000 m; 200 m for voltage measurement |
| Analog value generation for the inputs | |
| Measurement principle | Actual value encryption (successive approximation) |
| Integration and conversion time/resolution per channel | |
|
16 bit No 10 µs |
| Smoothing of measured values | |
|
7; none; 2-/4-/8-/16-/32-/64-fold Yes |
| Encoder | |
| Connection of signal encoders | |
|
Yes Yes 650 ohm Yes |
| Errors/accuracies | |
| Linearity error (relative to input range), (+/-) | 0.03 % 0.01 %/K |
| Temperature error (relative to input range), (+/-) | |
| Crosstalk between the inputs, min. | -50 dB 0.1 % |
| Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | |
| Operational error limit in overall temperature range | |
|
0.3 % 0.3 % |
| Basic error limit (operational limit at 25 °C) | |
|
0.2 % 0.2 % |
| Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency | |
|
35 V 90 dB |
| Isochronous mode | |
| Filtering and processing time (TCI), min. | 80 µs 125 µs; Starting from firmware Version V2.0.1 |
| Bus cycle time (TDP), min. | |
| Interrupts/diagnostics/status information | |
| Alarms | |
|
Yes Yes; two upper and two lower limit values in each case |
| Diagnoses | |
|
Yes; channel-by-channel, at 4 to 20 mA only Yes; channel-by-channel, at 1 to 5 V or for current measuring ranges short-circuit in encoder supply Yes Yes |
| Diagnostics indication LED | |
|
Yes; green PWR LED Yes; green LED Yes; red LED Yes; green/red DIAG LED |
| Potential separation | |
| Potential separation channels | |
|
Yes Yes Yes |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Ambient conditions | |
| Ambient temperature during operation | |
|
-30 °C 60 °C -30 °C 50 °C |
| Altitude during operation relating to sea level | |
|
5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions | |
| Width | 15 mm 73 mm 58 mm |
| Height | |
| Depth | |
| Weights | |
| Weight, approx. | 32 g |
| Shenzhen Aimiqu Technology Co., Ltd. |
Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field. Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet. And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories . In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr... |
| 1.Who we are We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands 2.Our advantage We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. I will try my best to give you the best price,prove that we are sincere. 3.Our Service Purpose We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal 4.Lead-Time Depending on thr model and quantity you need.So please tell us what you need now 5.Can't find the model you need? We have only shown some models,If the model you need is not found here,please contact us |
){kind=link}