New 6es7138-6dB00-0bb1 Simatic Et 200sp TM Pulse 2X24V Pulse Output Module PLC Original

• Customization: Available
• Task: Output
• Structure: Closed-Loop
• Model NO.: 6ES7138-6DB00-0BB1
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Output
• Certification: RoHS, CCC, CE
• Condition: New
• Customized: Non-Customized
• Material: Stainless Steel
• Product Type Designation: TM Pulse 2X24 V
• Width: 20 mm
• Height: 73 mm
• Depth: 58 mm
• Transport Package: Carton
• Specification: Weight, approx. 50 g
• Origin: Germany
• HS Code: 8538900000
• Production Capacity: 99999pieces/Year

Product Description

6ES7138-6DB00-0BB1 SIMATIC ET200SP TM Pulse 2x24V pulse output module PLC

Data sheet                                                                                                         6ES7138-6DB00-0BB1
 

SIMATIC ET 200SP, TM Pulse 2x24V PWM and pulse output 2 channels 2 A for proportional valves and DC motors
General information
Product type designation	TM Pulse 2x24 V
HW functional status	From FS03
Firmware version	V1.0
FW update possible	Yes
usable BaseUnits	BU type B1
Color code for module-specific color identification plate	CC40
Product function
I&M data Isochronous mode	Yes; I&M 0 Yes
Engineering with
STEP 7 TIA Portal configurable/integrated from version	V13 SP1 + HSP
STEP 7 configurable/integrated from version	V5.5 SP4 and higher
PROFIBUS from GSD version/GSD revision	GSD Revision 5
PROFINET from GSD version/GSD revision	GSDML V2.31
Supply voltage
Load voltage L+
Rated value (DC)	24 V
permissible range, lower limit (DC)	19.2 V
permissible range, upper limit (DC)	28.8 V
Short-circuit protection	Yes
Reverse polarity protection	Yes; against destruction
Input current
Current consumption, max.	70 mA; without load
Encoder supply
Number of outputs	2; A common 24V encoder supply for both channels
24 V encoder supply
24 V Short-circuit protection Output current, max.	Yes; L+ (-0.8 V) Yes; per module, electronic 300 mA
Power loss
Power loss, typ.	1.7 W
Address area
Address space per module
Inputs Outputs	16 byte; 8 per channel 24 byte; 12 per channel
Hardware configuration
Automatic encoding	Yes

 

Mechanical coding element Type of mechanical coding element	Yes type C
Digital inputs
Number of digital inputs	2; 1 per channel Yes Yes
Digital inputs, parameterizable
Input characteristic curve in accordance with IEC 61131, type 3
Digital input functions, parameterizable
Freely usable digital input HW enable for digital output	Yes Yes
Input voltage
Type of input voltage Rated value (DC) for signal "0" for signal "1" permissible voltage at input, min. permissible voltage at input, max.	DC 24 V -5 ... +5 V +11 to +30V -30 V; -5 V continuous, -30 V brief reverse polarity protection 30 V
Input current
for signal "1", typ.	2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
- parameterizable - at "0" to "1", min. - at "1" to "0", min.	Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms 4 µs; for parameterization "none" 4 µs; for parameterization "none"
Digital outputs
Type of digital output	P- and M-switching 2; 1 per channel Yes Yes Yes Yes; electronic/thermal 6.8 A with Standard output, 2 A with High Speed output -0.8 V Yes ±100 ppm ±0.5 µs with High Speed output, ±100 ppm ±9 µs with Standard output 1.5 µs; With High Speed output, 10 µs with Standard output
Number of digital outputs
Current-sinking
Current-sourcing
Digital outputs, parameterizable
Short-circuit protection Response threshold, typ.
Limitation of inductive shutdown voltage to
Controlling a digital input
Accuracy of pulse duration
minimum pulse duration
Digital output functions, parameterizable
Freely usable digital output PWM output Number, max. Cycle duration, parameterizable ON period, min. ON period, max. Resolution of the duty cycle Connection of a proportional valve Dithering Frequency adjustable Amplitude adjustable Current measurement Current control Connection of a DC motor ON-delay OFF-delay Frequency output Pulse train Pulse output	Yes Yes 2; 1 per channel Yes; Max. 85 s 0 % 100 % 0.0036 %; For S7 analog format, min. 20 ns Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Switching capacity of the outputs
with resistive load, max. on lamp load, max.	2 A 10 W; 1 W with High Speed output

 

Load resistance range
lower limit upper limit	12 ; 240 ohm with High Speed output 12 k
Output voltage
Type of output voltage for signal "0", max. for signal "1", min.	DC 1 V 23.2 V; L+ (-0.8 V)
Output current
for signal "1" rated value	2 A; 0.1 A with High Speed output, observe derating
Output delay with resistive load
"0" to "1", typ. "0" to "1", max. "1" to "0", typ. "1" to "0", max.	0 µs; With High Speed output, 4.5 µs with Standard output 0.8 µs; With High Speed output, 9 µs with Standard output 0 µs; With High Speed output, 4.5 µs with Standard output 0.8 µs; With High Speed output, 9 µs with Standard output
Parallel switching of two outputs
for uprating	Yes
Switching frequency
with resistive load, max. with inductive load, max. on lamp load, max.	100 kHz; With High Speed output, 10 kHz with standard output 100 kHz; With High Speed output, 10 kHz with standard output 10 Hz
Total current of the outputs
Current per channel, max. Current per group, max. Current per module, max.	2 A 4 A 4 A
Isochronous mode
Bus cycle time (TDP), min.	250 µs; with 1 channel configuration, 375 µs with 2 channel configuration 1 µs; typically ±
Jitter, max.
Interrupts/diagnostics/status information
Diagnostics function	Yes Yes; Parameterizable
Substitute values connectable
Alarms
Diagnostic alarm	Yes
Diagnoses
Monitoring the supply voltage Short-circuit	Yes Yes
Diagnostics indication LED
Monitoring of the supply voltage (PWR-LED) Channel status display for module diagnostics	Yes; green PWR LED Yes Yes; green/red DIAG LED
Integrated Functions
Counter	No
Potential separation
Potential separation channels
between the channels between the channels and backplane bus	No Yes
Isolation
Isolation tested with	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions	No
Ambient conditions
Ambient temperature during operation
horizontal installation, min. horizontal installation, max. vertical installation, min. vertical installation, max.	-30 °C 60 °C; Observe derating -30 °C 50 °C; Observe derating
Altitude during operation relating to sea level
Installation altitude above sea level, max.	5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual

 

Decentralized operation
to SIMATIC S7-300	Yes Yes Yes
to SIMATIC S7-400
to SIMATIC S7-1200
to SIMATIC S7-1500	Yes
to standard PROFIBUS master	Yes Yes
to standard PROFINET controller
Dimensions
Width	20 mm 73 mm 58 mm
Height
Depth
Weights
Weight, approx.	50 g

 

 

 

Shenzhen Aimiqu Technology Co., Ltd.

Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field.

 

Provide products, solutions and services for the majority of industrial enterprises and governments with automation systems, digital factories, industrial Internet and industrial big data intelligent integration, and strive to become a domestic intelligent manufacturing overall solution provider.


Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet.

And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories .

In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr...

 

Hot selling brand

Packing and shipping

                                                                                                                                                                                                              

FAQ
                                                                                                                                                                                                              

1.Who we are
  We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands

2.Our advantage
  We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. 
  I will try my best to give you the best price,prove that we are sincere. 

3.Our Service Purpose
   We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal

4.Lead-Time
   Depending on thr model and quantity you need.So please tell us what you need now 

5.Can't find the model you need?
   We have only shown some models,If the model you need is not found here,please contact us