High Quantity New Interface Electrical Control System Module PLC 6es7155-5ba00-0ab0

• Task: Connect
• Mathematical Model: Linear
• Signal: Continuous
• Function: Connect
• Certification: CE
• Condition: New
• Model NO.: 6es7155-5ba00-0ab0
• Customized: Non-Customized
• Width: 35 mm
• Height: 147 mm
• Depth: 129 mm
• Transport Package: Carton
• Origin: Germany
• HS Code: 8471504090
• Production Capacity: 99999pieces/Year

Product Description

High Quantity New Interface Electrical Control System Module PLC 6es7155-5ba00-0ab0

Overview

• Interface module for connecting ET 200MP to PROFIBUS
• Handles data exchange with the PROFIBUS master in the PLC
• Max. 12 I/O modules
• Automatic detection of baud rate 9.6 kBd ... 12 MBd
• PROFIBUS addresses 1 ... 125; adjustable using DIP switches
• Identification and maintenance data IM0 ... IM3

 

 

Application

The IM 155-5 DP ST interface module enables the connection of ET 200MP to PROFIBUS and handles the communication between the modules and the higher-level PROFIBUS master autonomously in the PLC.

 

 

Design

The IM 155-5 DP ST interface module is screwed directly onto the S7-1500 mounting rail. The IM 155-5 DP ST features the following:

• Diagnostics display for error (Error), operation (RUN), and maintenance (MAINT).
• Connection to PROFIBUS using 9-pin SUB-D-connector; one PROFIBUS connector of type 6ES7972-0BB70-0XA0 is included in the delivery scope.
• 24 V DC supply unit for looping through the supply voltage.
• Protection of interface module against unauthorized access possible using lock, seal or cable tie.

Data sheet                                                                                                         6ES7155-5BA00-0AB0

SIMATIC ET 200MP. PROFIBUS connection IM 155-5 DP ST for max. 12 S7-1500 modules Including PROFIBUS connection plug (6ES7972-0BB70- 0XA0)
General information
Product type designation	IM 155-5 DP ST From FS01 V2.0.0 81AAh
HW functional status
Firmware version
Vendor identification (VendorID)
Product function
I&M data Module swapping during operation (hot swapping) Isochronous mode	Yes; I&M0 to I&M3 No No
Engineering with
STEP 7 TIA Portal configurable/integrated from version STEP 7 configurable/integrated from version PROFIBUS from GSD version/GSD revision	V13 / V13 V5.5 SP3 / - V1.0 / V5.1
Configuration control
via user data	No No
via dataset
Supply voltage
Rated value (DC)	24 V 19.2 V 28.8 V Yes Yes
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Reverse polarity protection
Short-circuit protection
Mains buffering
Mains/voltage failure stored energy time	5 ms
Input current
Current consumption (rated value)	0.2 A; at 24 V DC and without load 1.2 A; at 20.4 V DC and max. load 4 A 0.09 A²·s 80 mA
Current consumption, max.
Inrush current, max.
I²t
from interface 5 V DC, max.
Power
Infeed power to the backplane bus	14 W
Power loss
Power loss, typ.	4 W
Address area
Address space per module
Address space per module, max.	32 byte; per input / output
Address space per station

 

Address space per station, max.                                      244 byte; per input / output
Hardware configuration
Integrated power supply	Yes No 1
System power supply can be plugged in to left of IM
Number of permissible power segments
Rack
Modules per rack, max.	12; I/O modules
Interfaces
Number of PROFIBUS interfaces	1
1. Interface
Interface types
RS 485	Yes
Protocols
PROFIBUS DP slave	Yes
Interface types
RS 485
Transmission rate, max.	12 Mbit/s
Protocols
Open IE communication
TCP/IP	No
PROFIBUS DP
Services
SYNC capability FREEZE capability DPV1	Yes Yes Yes
Interrupts/diagnostics/status information
Status indicator	Yes Yes Yes
Alarms
Diagnostics function
Diagnostics indication LED
RUN LED ERROR LED MAINT LED Connection display DP	Yes; green LED Yes; red LED Yes; Yellow LED Yes; green LED
Potential separation
between backplane bus and electronics	No Yes No
between PROFIBUS DP and all other circuit components
between supply and all other circuits
Isolation
Isolation tested with	707 V DC (type test)
Ambient conditions
Ambient temperature during operation
horizontal installation, min. horizontal installation, max. vertical installation, min. vertical installation, max.	-25 °C; from FS04 60 °C -25 °C; from FS04 40 °C
Altitude during operation relating to sea level
Installation altitude above sea level, max.	5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
connection method / header
ET-Connection
via BU/BA Send	No
Dimensions
Width	35 mm 147 mm 129 mm
Height
Depth
Weights
Weight, approx.	360 g

 

 

 

Shenzhen Aimiqu Technology Co., Ltd.

Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field.

 

Provide products, solutions and services for the majority of industrial enterprises and governments with automation systems, digital factories, industrial Internet and industrial big data intelligent integration, and strive to become a domestic intelligent manufacturing overall solution provider.


Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet.

And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories .

In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr...

 

Hot selling brand

Packing and shipping

                                                                                                                                                                                                              

FAQ
                                                                                                                                                                                                              

1.Who we are
  We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands

2.Our advantage
  We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. 
  I will try my best to give you the best price,prove that we are sincere. 

3.Our Service Purpose
   We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal

4.Lead-Time
   Depending on thr model and quantity you need.So please tell us what you need now 

5.Can't find the model you need?
   We have only shown some models,If the model you need is not found here,please contact us