| Customization: | Available |
|---|---|
| Task: | Digita Output |
| Structure: | Closed-Loop |
|
Still deciding? Get samples of US$ 950/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508) | |||
| General information | |||
| Product type designation | F-DQ 4x24 V DC/2A HF | ||
| usable BaseUnits | BU type A0 | ||
| Product function | |||
|
Yes; I&M0 to I&M3 | ||
| Engineering with | |||
|
V12 | ||
|
V5.5 SP3 / - | ||
|
V2.31 | ||
| Supply voltage | |||
| Rated value (DC) | 24 V | ||
| permissible range, lower limit (DC) | 20.4 V | ||
| permissible range, upper limit (DC) | 28.8 V | ||
| Reverse polarity protection | Yes | ||
| power supply according to NEC Class 2 required | No | ||
| Input current | |||
| Current consumption (rated value) | 75 mA; without load | ||
| Current consumption, max. | 21 mA; From the backplane bus | ||
| output voltage / header | |||
| Rated value (DC) | 24 V | ||
| Power | |||
| Power available from the backplane bus | 70 mW | ||
| Power loss | |||
| Power loss, typ. | 4 W | ||
| Address area | |||
| Address space per module | |||
|
5 byte | ||
|
5 byte | ||
| Hardware configuration | |||
Automatic encoding
|
Yes | ||
| Yes | |||
| Digital outputs | |||
| Type of digital output | Transistor | ||
| Number of digital outputs | 4 | ||
| Digital outputs, parameterizable | Yes | ||
Short-circuit protection
|
Yes | ||
| > 3.3 A | |||
| Open-circuit detection | Yes | ||
|
8 mA | ||
Overload protection
|
Yes | ||
| 2.9 A | |||
| Limitation of inductive shutdown voltage to | Typ. -2x 47 V | ||
| Switching capacity of the outputs | |||
|
2 A | ||
|
10 W | ||
| Load resistance range | |||
|
12 ohm | ||
|
2 000 ohm | ||
| Output voltage | |||
|
24 V; L+ (-0.5 V) | ||
| Output current | |||
|
2 A | ||
|
0.5 mA | ||
| Switching frequency | |||
|
30 Hz; Symmetrical | ||
|
0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical | ||
|
10 Hz; Symmetrical | ||
| Total current of the outputs | |||
|
2 A; note derating data in the manual | ||
|
6 A; note derating data in the manual | ||
| Cable length | |||
|
1 000 m | ||
|
500 m | ||
| Interrupts/diagnostics/status information | |||
| Diagnostics function | Yes | ||
| Substitute values connectable | No | ||
| Alarms | |||
|
Yes | ||
| Diagnostics indication LED | |||
|
Yes; green LED | ||
|
Yes; red LED | ||
|
Yes; green PWR LED | ||
|
Yes; green LED | ||
|
Yes; red LED | ||
|
Yes; green/red DIAG LED | ||
| Potential separation | |||
| Potential separation channels | |||
|
No | ||
|
Yes | ||
|
No | ||
| Isolation | |||
| Isolation tested with | 707 V DC (type test) | ||
| Standards, approvals, certificates | |||
| Suitable for safety functions | Yes | ||
| Highest safety class achievable in safety mode | |||
|
PLe | ||
|
SIL 3 | ||
| Probability of failure (for service life of 20 years and repair time of 100 hours) | |||
| - Low demand mode: PFDavg in accordance with SIL2 | < 2.00E-04 | ||
| - Low demand mode: PFDavg in accordance with SIL3 | < 2.00E-05 | ||
| - High demand/continuous mode: PFH in accordance with SIL2 | < 1.00E-08 1/h | ||
| - High demand/continuous mode: PFH in accordance with SIL3 | < 1.00E-09 1/h | ||
| Ambient conditions | |||
| Ambient temperature during operation | |||
|
0 °C 60 °C 0 °C 50 °C |
| Altitude during operation relating to sea level | |
|
4 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Dimensions | |
| Width | 15 mm 73 mm 58 mm |
| Height | |
| Depth | |
| Weights | |
| Weight, approx. | 57 g |
| Shenzhen Aimiqu Technology Co., Ltd. |
Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field. Provide products, solutions and services for the majority of industrial enterprises and governments with automation systems, digital factories, industrial Internet and industrial big data intelligent integration, and strive to become a domestic intelligent manufacturing overall solution provider. Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet. And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories . In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr... |
| 1.Who we are We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands 2.Our advantage We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. I will try my best to give you the best price,prove that we are sincere. 3.Our Service Purpose We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal 4.Lead-Time Depending on thr model and quantity you need.So please tell us what you need now 5.Can't find the model you need? We have only shown some models,If the model you need is not found here,please contact us |
){kind=link}