| Customization: | Available |
|---|---|
| Task: | Adjust |
| Structure: | Combination |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
New and original siemen-s soft starter 3RW4026-1BB04
| General technical data | ||
| product brand name | SIRIUS | |
| product designation | Soft starter | |
| product feature | ||
| integrated bypass contact system | Yes | |
| thyristors | Yes | |
| product function | ||
| intrinsic device protection | Yes | |
| motor overload protection | Yes | |
| evaluation of thermistor motor protection | No | |
| external reset | Yes | |
| adjustable current limitation | Yes | |
| inside-delta circuit | No | |
| product component motor brake output | No | |
| insulation voltage rated value | V | 600 |
| degree of pollution | 3, acc. to IEC 60947-4-2 | |
| blocking voltage of the thyristor maximum | V | 1 600 |
| reference code according to EN 61346-2 | Q | |
| reference code according to DIN 40719 extended according to IEC 204-2 according to IEC 750 | G | |
| Power Electronics | ||
| operational current | ||
| at 40 °C rated value | A | 25 |
| at 50 °C rated value | A | 23 |
| at 60 °C rated value | A | 21 |
| yielded mechanical performance for 3-phase motors | ||
| at 230 V | ||
| - at standard circuit at 40 °C rated value | kW | 5.5 |
| at 400 V | ||
| - at standard circuit at 40 °C rated value | kW | 11 |
| yielded mechanical performance [hp] for 3-phase AC motor at 200/208 V at standard circuit at 50 °C rated value | hp | 5 |
| operating frequency rated value | Hz | 50 ... 60 |
| relative negative tolerance of the operating frequency | % | -10 |
| relative positive tolerance of the operating frequency | % | 10 |
| operating voltage at standard circuit rated value | V | 200 ... 480 |
| relative negative tolerance of the operating voltage at standard circuit | % | -15 |
| relative positive tolerance of the operating voltage at standard circuit | % | 10 |
| minimum load [%] | % | 20 |
| adjustable motor current for motor overload protection minimum rated value | A | 10 | |
| continuous operating current [% of Ie] at 40 °C | % | 115 | |
| power loss [W] at operational current at 40 °C during operation typical | W | 8 | |
| Control circuit/ Control | |||
| type of voltage of the control supply voltage | AC/DC | ||
| control supply voltage frequency 1 rated value | Hz | 50 | |
| control supply voltage frequency 2 rated value | Hz | 60 | |
| relative negative tolerance of the control supply voltage frequency | % | -10 | |
| relative positive tolerance of the control supply voltage frequency | % | 10 | |
| control supply voltage 1 at AC | |||
| at 50 Hz rated value | V | 24 | |
| at 60 Hz rated value | V | 24 | |
| relative negative tolerance of the control supply voltage at AC at 50 Hz | % | -15 | |
| relative positive tolerance of the control supply voltage at AC at 50 Hz | % | 10 | |
| relative negative tolerance of the control supply voltage at AC at 60 Hz | % | -15 | |
| relative positive tolerance of the control supply voltage at AC at 60 Hz | % | 10 | |
| control supply voltage 1 at DC rated value | V | 24 | |
| relative negative tolerance of the control supply voltage at DC | % | -20 | |
| relative positive tolerance of the control supply voltage at DC | % | 20 | |
| display version for fault signal | red | ||
| Mechanical data | |||
| size of engine control device | S0 | ||
| width | mm | 45 | |
| height | mm | 125 | |
| depth | mm | 155 | |
| fastening method | screw and snap-on mounting | ||
| mounting position | With additional fan: With vertical mounting surface +/-90° rotatable, with vertical mounting surface +/- 22.5° tiltable to the front and back Without additional fan: With vertical mounting surface +/-10° rotatable, with vertical mounting surface +/- 10° t |
||
| required spacing with side-by-side mounting | |||
| upwards | mm | 60 | |
| at the side | mm | 15 | |
| downwards | mm | 40 | |
| wire length maximum | m | 300 | |
| number of poles for main current circuit | 3 | ||
| Connections/ Terminals | |||
| type of electrical connection | |||
| for main current circuit | screw-type terminals | ||
| for auxiliary and control circuit | screw-type terminals | ||
| number of NC contacts for auxiliary contacts | 0 | ||
| number of NO contacts for auxiliary contacts | 2 | ||
| number of CO contacts for auxiliary contacts | 1 | ||
| type of connectable conductor cross-sections for main contacts for box terminal using the front clamping point | |||
| solid | 2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²), max. 1x 10 mm² | ||
| finely stranded with core end processing | 2x (1 ... 2.5 mm²), 2x (2.5 ... 6 mm²) | ||
| type of connectable conductor cross-sections for AWG cables for main contacts for box terminal | |||
| using the front clamping point | 1x 8, 2x (16 ... 10) | ||
| type of connectable conductor cross-sections for auxiliary contacts | |||
| solid | 2x (0.5 ... 2.5 mm²) | ||
| finely stranded with core end processing | 2x (0.5 ... 1.5 mm²) | ||
| type of connectable conductor cross-sections for AWG cables | |||
){kind=link}