Smart Transmitter Power Supply P+F Kcd2-Stc-Ex1

• Condition: New
• Customized: Non-Customized
• Transport Package: Carton
• Specification: P+F
• Trademark: AIMIQU
• Origin: Chinna
• Model NO.: KCD2-STC-Ex1
• HS Code: 9026100000
• Production Capacity: 9999999pieces/Year

Product Description

SMART Transmitter Power Supply P+F KCD2-STC-Ex1

• 1-channel isolated barrier
• 24 V DC supply (Power Rail)
• Input for 2-wire SMART transmitters and current sources
• Output for 4 mA ... 20 mA or 1 V ... 5 V
• Housing width 12.5 mm
• Up to SIL 2 (SC 3) acc. to IEC/EN 61508

Functional safety related parameters
Safety Integrity Level (SIL)		SIL 2
Systematic capability (SC)		SC 3
Supply
Connection		Power Rail or terminals 9+, 10-
Rated voltage	Ur	19 ... 30 V DC
Ripple		≤  10 %
Rated current	Ir	≤ 45 mA at 24 V and 20 mA source mode output
Power dissipation		≤ 800 mW
Power consumption		≤  1.1 W
Input
Connection side		field side
Connection		terminals 1+, 2-; 3+, 4-
Input signal		4 ... 20 mA limited to approx. 26 mA
Open circuit voltage/short-circuit current		terminals 1+, 2-: 22 V / 26 mA
Voltage drop		terminals 3+, 4- : approx. 5 V
Available voltage		terminals 1+, 2-: ≥ 15 V at 20 mA ;  ≥ 18 V at 4 mA
Output
Connection side		control side
Connection		terminals 5-, 6+ terminals 5-, 8+ for HART resistor
Load		0 ... 350 Ω (source mode)
Output signal		source mode: 4 ... 20 mA or 1 ... 5 V (internal resistor: 250 Ω, 0.1 %) sink mode: 4 ... 20 mA, operating voltage 10 ... 30 V For additional internal or external loads (e. g. terminal +8) the voltage drop has to be considered, e. g. 250 Ω x 20 mA = 5 V.
Ripple		20 mV rms
Transfer characteristics
Deviation		at 20 °C (68 °F) < 0.1 % of full scale, incl. non-linearity and hysteresis (source mode and sink mode 4 ... 20 mA) ≤ ± 0.2 % incl. non-linearity and hysteresis (source mode  1 ... 5 V)
Influence of ambient temperature		< 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F)) (source mode and sink mode 4 ... 20mA) < 0.5 mV/K (-20 ... 70 °C (-4 ... 158 °F)); < 1 mV/K (-40 ... -20 °C (-40 ... -4 °F)) (source mode 1...5 V)
Frequency range		field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)
Settling time		≤ 50 ms
Rise time/fall time		≤ 10 ms
Galvanic isolation
Input/Output		basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Input/power supply		reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Output/power supply		basic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Indicators/settings
Display elements		LED
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU		EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2017 EN 61326-3-2:2018
Degree of protection		IEC 60529:2001
Protection against electrical shock		UL 61010-1:2012

Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection		IP20
Connection		screw terminals
Mass		approx. 100 g
Dimensions		12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2
Mounting		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate		CESI 06 ATEX 021
Marking		1 II (1)G [Ex ia Ga] IIC 1 II (1)D [Ex ia Da] IIIC 1 I (M1) [Ex ia Ma] I
Input		Ex ia
Supply
Maximum safe voltage	Um	250 V AC (Attention! Um  is no rated voltage.)
Equipment		terminals 1+, 2-
Voltage	Uo	25.2 V
Current	Io	100 mA
Power	Po	630 mW
Internal capacitance	Ci	5.7 nF
Internal inductance	Li	negligible
Equipment		terminals 3+, 4-
Voltage	Ui	30 V
Current	Ii	128 mA
Voltage	Uo	7.2 V
Current	Io	100 mA
Power	Po	25 mW
Internal capacitance	Ci	5.7 nF
Internal inductance	Li	negligible
Certificate		CESI 19 ATEX 021 X
Marking		1 II 3G Ex ec IIC T4 Gc
Galvanic isolation
Input/Output		safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Input/power supply		safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
Directive 2014/34/EU		EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015
International approvals
FM approval
FM certificate		FM 18 CA 0116 X , FM 19 US 0117 X
Control drawing		116-0469 (cFMus)
UL approval		E106378
Control drawing		116-0459 (cULus)
IECEx approval
IECEx certificate		IECEx CES 06.0001X
IECEx marking		[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see .

 

 

Shenzhen Aimiqu Technology Co., Ltd.

Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field. Provide products, solutions and services for the majority of industrial enterprises and governments with automation systems, digital factories, industrial Internet and industrial big data intelligent integration, and strive to become a domestic intelligent manufacturing overall solution provider.


Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet.

And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories .

In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr...

Hot selling brand

Packing and shipping

                                                                                                                                                                                                              

FAQ
                                                                                                                                                                                                              

1.Who we are
  We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands

2.Our advantage
  We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. 
  I will try my best to give you the best price,prove that we are sincere. 

3.Our Service Purpose
   We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal

4.Lead-Time
   Depending on thr model and quantity you need.So please tell us what you need now 

5.Can't find the model you need?
   We have only shown some models,If the model you need is not found here,please contact us