Electrical 6es7136-6ba01-0ca0 Siemne-S Digital F-Input Modules PLC of Siemens

• Task: Following
• Structure: Combination
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Monitoring, Measurement
• Certification: CE
• Model NO.: 6ES7136-6BA01-0CA0
• Condition: New
• Customized: Non-Customized
• Width: 15 mm
• Height: 73 mm
• Depth: 58 mm
• Product Function: I&M Data; I&M0 to I&M3
• Rated Value (DC): 24 V
• Transport Package: Carton
• Specification: Weight, approx. 29 g
• Origin: Germany
• HS Code: 9027900000
• Production Capacity: 99999pieces/Year

Product Description

6ES7136-6BA01-0CA0 Digital F-input modules PLC for ET 200SP F-DI 8x 24 V DC HF

SIMATIC DP, electronic module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PLe (ISO 13849-1)/ SIL3 (IEC 61508)

Data sheet                                                                                                         6ES7136-6BA01-0CA0

SIMATIC DP, electronic module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PLe (ISO 13849-1)/ SIL3 (IEC 61508)
General information
Product type designation	F-DI 8x24VDC HF Yes BU type A0 CC01
Firmware version FW update possible
usable BaseUnits
Color code for module-specific color identification plate
Product function
I&M data	Yes; I&M0 to I&M3
Engineering with
STEP 7 TIA Portal configurable/integrated from version STEP 7 configurable/integrated from version PROFINET from GSD version/GSD revision	SIMATIC Safety V17 with HSP 0360 or higher as 6ES7136-6BA00-0CA0 GSDML V2.35
CiR - Configuration in RUN
Reparameterization possible in RUN	No
Supply voltage
Rated value (DC)	24 V 19.2 V 28.8 V Yes No
permissible range, lower limit (DC)
permissible range, upper limit (DC)
Reverse polarity protection
power supply according to NEC Class 2 required
Input current
Current consumption, max.	40 mA; without load
Encoder supply
Number of outputs	8
24 V encoder supply
24 V Short-circuit protection Output current per channel, max. Output current per module, max.	Yes; min. L+ (-1.5 V) Yes; Electronic (response threshold 0.7 A to 1.8 A) 300 mA 800 mA; Total current of all encoders
Power loss
Power loss, typ.	2 W
Address area
Address space per module
Inputs Outputs	7 byte; S7-300/400F CPU, 6 byte 5 byte; S7-300/400F CPU, 4 byte
Hardware configuration
Automatic encoding Electronic coding element type F	Yes Yes

 

Digital inputs
Number of digital inputs	8 Yes; P-reading Yes
Source/sink input
Input characteristic curve in accordance with IEC 61131, type 1
Input voltage
Rated value (DC) for signal "0" for signal "1"	24 V -30 to +5 V +15 to +30 V
Input current
for signal "1", typ.	3.7 mA
Input delay (for rated value of input voltage)
for standard inputs
- parameterizable	Yes
- at "0" to "1", min.	0.4 ms
- at "0" to "1", max.	20 ms
- at "1" to "0", min.	0.4 ms
- at "1" to "0", max.	20 ms
for technological functions
- parameterizable	No
Cable length
shielded, max. unshielded, max.	1 000 m 500 m
Interrupts/diagnostics/status information
Diagnostics function	Yes
Alarms
Diagnostic alarm Hardware interrupt	Yes No
Diagnostics indication LED
RUN LED	Yes; green LED
ERROR LED	Yes; red LED
Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
Channel status display	Yes; green LED
for channel diagnostics	Yes; red LED
for module diagnostics	Yes; green/red DIAG LED
Potential separation
Potential separation channels
between the channels between the channels and backplane bus between the channels and the power supply of the electronics	No Yes No
Isolation
Isolation tested with	707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions	Yes
Highest safety class achievable in safety mode
Performance level according to ISO 13849-1 Category according to ISO 13849-1 SIL acc. to IEC 61508	PLe Cat. 4 SIL 3
Probability of failure (for service life of 20 years and repair time of 100 hours)
- Low demand mode: PFDavg in accordance	< 2.00E-05
with SIL3
- High demand/continuous mode: PFH in	< 1.00E-09 1/h
accordance with SIL3
Ambient conditions
Ambient temperature during operation
horizontal installation, min.	0 °C
horizontal installation, max.	60 °C
vertical installation, min.	0 °C
vertical installation, max.	50 °C

 

Altitude during operation relating to sea level
Installation altitude above sea level, max.	4 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual
Dimensions
Width	15 mm 73 mm 58 mm
Height
Depth
Weights
Weight, approx.	29 g

 

Shenzhen Aimiqu Technology Co., Ltd.

Shenzhen Aimiqu Technology Co., Ltd. was established in 2016 and is located in Bao'an District, Shenzhen. The company has professional technical personnel, focusing on the development and practice of automation, digitalization, networking and intelligence in the industrial field. Provide products, solutions and services for the majority of industrial enterprises and governments with automation systems, digital factories, industrial Internet and industrial big data intelligent integration, and strive to become a domestic intelligent manufacturing overall solution provider.


Shenzhen Aimiqu is a factory specializing in production & sales & research in electric cabinet.

And Shenzhen Aimiqu is a specializing in sales original PLC&pneumatic products & Industrial Control Instrumentation including Siemens,Fairchild and ST etc and related accessories .

In PLC&Pump Valve & Pneumatic industry&Industrial Control Instrumentation has a strong popularity and good reputation,and provide professional customized services(Our main business is according to customer dr...

Hot selling brand

Packing and shipping

                                                                                                                                                                                                              

FAQ
                                                                                                                                                                                                              

1.Who we are
  We focus on the PLC, instrument and transmitters industry, mainly selling world-famous PLC,instrument and transmitters brands

2.Our advantage
  We have been in the industry for many years, and we have strong supply chain relationships and large inventories, with great price advantages. 
  I will try my best to give you the best price,prove that we are sincere. 

3.Our Service Purpose
   We want to build a long-term stable relationship, not a one-off business, to achieve a win-win goal

4.Lead-Time
   Depending on thr model and quantity you need.So please tell us what you need now 

5.Can't find the model you need?
   We have only shown some models,If the model you need is not found here,please contact us